ABILENE, TX – Tige Boats is pleased to welcome Erwin’s Marine to their worldwide family of dealers. Erwin’s Marine will proudly serve current and future Tige owners in North West Indiana in the city of Valparaiso. Being in business for over half a century, Erwin’s Marine is recognized for their outstanding sales and service.
With wakesurfing growing so rapidly and their customer’s peaked interest in the sport, Scott Erwin, Owner of Erwin's Marine said, “We were looking to take on an inboard to meet our customer’s needs and there was no question that Tige would be the perfect fit.” Erwin’s Marine is currently stocked with 2017 Tige models with the TAPS 3 Surf System and they’re ready to take you for a ride you won’t forget. “We are excited to become a Tige dealer because of their craftsmanship and reputation in the boating industry, plus their product versatility will attract new customers,” said Scott. Erwin’s Marine invites you to come take a demo and become a part of their Tige family!
Tige Boats is represented by a worldwide dealer network. Dealership opportunities continue to be available both in the US and internationally to those dedicated to carrying on the Tige legacy and commitment to customer service to Tige customers.
Contact Info: Erwin’s Marine
1858 W. Lincolnway
Valparaiso, IN 46385
(219) 462-1634
erwinsmarine@gmail.com
www.erwinsmarine.com
-
*NOTE OF CAUTION* Check your owners manual for specific information such as fluid type and capacity.
Boat: 06 22Ve
Transmission: Borg-Warner Velvet Drive 10-17-004, 1:1/ Fluid type = Dexron III ATF / Capacity = 2qt
V-Drive: Walter RV26D / Fluid Type = 30w NON-Detergent oil. (RV10-RV50 use 30w oil. RV61-RV91 use an ISO VG 68 such as Shell Omala 68 or Exxon Spartan EP 68) / Capacity = 1qt
https://www.tigeowners.com/forum/tec...on-and-v-drive11-21-2021, 10:59 PM -
I had to get back in the bilge, and my packing was leaking so I figured I would go ahead and put a dripless gor type in. I hope these photos can help someone.
https://www.tigeowners.com/forum/tec...hange-overview11-21-2021, 10:57 PM -
The following article is how to change an impeller on a 2001 Tigé 2300 V with a MerCruiser 350 Mag engine. Other Tigé V-drive models may be similar. If you have a Direct Drive model you may pick up some useful tips, but the procedure for removing the pump will not apply.
https://www.tigeowners.com/forum/tec...mercury-engine11-21-2021, 10:55 PM -
The Jabsco Impeller is one of the easiest impeller to swap out.
https://www.tigeowners.com/forum/tec...absco-impeller11-21-2021, 10:48 PM -
This article will help you change a steering cable with a Teleflex rack system. This will only cover changing the steering cable and not how to remove parts of the interior and flooring to get to the steering cable as there are a lot of different boats that this same procedure will work on.
https://www.tigeowners.com/forum/tec...steering-cable11-21-2021, 10:45 PM