ABILENE, TX—Tige Boats is excited to announce their new partnership with Anderson Marine in Old Hickory, Tennessee, near Nashville. Anderson Marine will showcase the Tige lineup at the Nashville Boat Show from January 8-11, 2015.
Ray and Joy Anderson, the owners of Anderson Marine, have been dedicated to serving the Nashville boating community for over 33 years. Ray has followed his passion of boats and motors by offering a top-notch service center with highly trained and certified mechanics so that customers experience personal attention and professional service. The Anderson Marine team is eager to serve Tige owners in their area as well as grow the Tige family.
Tige Boats is represented by a worldwide dealer network. Dealership opportunities continue to be available across the globe to those dedicated to carrying on the Tige legacy and its commitment to providing extraordinary service to its customers.
Tige Boats launched in 1991 placing innovation and passion at the heart of their boats. Today, Tige keeps these values alive with one common goal in mind—to make your ride better than anything else on the water. From the new ASR to the highly-acclaimed Z3 and throughout the entire 2015 lineup, Tige produces the most technologically advanced product line specializing in massive wakeboarding wakes and ocean-size wakesurf waves. Become a part of it at Tige.com.
Anderson Marine
841 Robinson Road
Old Hickory, TN 37138
Phone: (615) 865-7885
Email: joy@andersonmarine.com
www.andersonmarine.com
-
*NOTE OF CAUTION* Check your owners manual for specific information such as fluid type and capacity.
Boat: 06 22Ve
Transmission: Borg-Warner Velvet Drive 10-17-004, 1:1/ Fluid type = Dexron III ATF / Capacity = 2qt
V-Drive: Walter RV26D / Fluid Type = 30w NON-Detergent oil. (RV10-RV50 use 30w oil. RV61-RV91 use an ISO VG 68 such as Shell Omala 68 or Exxon Spartan EP 68) / Capacity = 1qt
https://www.tigeowners.com/forum/tec...on-and-v-drive11-21-2021, 10:59 PM -
I had to get back in the bilge, and my packing was leaking so I figured I would go ahead and put a dripless gor type in. I hope these photos can help someone.
https://www.tigeowners.com/forum/tec...hange-overview11-21-2021, 10:57 PM -
The following article is how to change an impeller on a 2001 Tigé 2300 V with a MerCruiser 350 Mag engine. Other Tigé V-drive models may be similar. If you have a Direct Drive model you may pick up some useful tips, but the procedure for removing the pump will not apply.
https://www.tigeowners.com/forum/tec...mercury-engine11-21-2021, 10:55 PM -
The Jabsco Impeller is one of the easiest impeller to swap out.
https://www.tigeowners.com/forum/tec...absco-impeller11-21-2021, 10:48 PM -
This article will help you change a steering cable with a Teleflex rack system. This will only cover changing the steering cable and not how to remove parts of the interior and flooring to get to the steering cable as there are a lot of different boats that this same procedure will work on.
https://www.tigeowners.com/forum/tec...steering-cable11-21-2021, 10:45 PM