2020 RZX crossover line and drain plugs

[Classic tige]

I need help confirming that the cross over line does not exist on a 2020 RZX raptor 400 engine. I pulled the floor up and don’t see this line. I drained the debris filter and found 3 other blue drain plugs. Am I missing one and does it have the crossover line? I feel that should be an easy line to see but I just don’t.
thanks!

[lee]

It is there, connects the exhaust manifolds.

[Classic tige]

Thanks. I will look again. Should be easy to see but I guess I missed it.

[Classic tige]

Lee, do you have a picture of where it is located?

[lee]

It is right under or just on top of the v-drive.

[Classic tige]

Well, you this is what I have. I pulled the hoses from the debris filter on either side of the V-drive. I can’t find a line otherwise. I pulled 3 blue plastic guys. I guess that’s all I have… any other advice?

[lee]

Look at the exhaust manifolds, on the rear side of the engine, front side of the boat, do you have brass plugs or a cross over hose connected?

[Classic tige]

There are 2 brass plugs. Hard to get to!!!

[lee]

So, you need to remove those. You do not have the crossover hose.

[Classic tige]

That’s gonna be fun!!! Lol