My 2005 24V Taps are not working. I can't find a fuse or breaker to check. Any pointers would be appreciated!
Announcement
Collapse
No announcement yet.
Taps Not Working - Fuse Location?
Collapse
X
-
Aren't the breakers located on the right hand side of the dash bezel? Here is and 05 24V, and O know they are on an 04 22V and an 05 22V that I've worked on.
http://www.tigeowners.com/forum/show...5&postcount=35
Whitlock, i'm 99% sure you've got a breaker or fuse somewhere, got to beMikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
[QUOTE=chpthril
Whitlock, i'm 99% sure you've got a breaker or fuse somewhere, got to be [/QUOTE]
I would have thought so, but on my Switch-V I have 2 wires going to the ram, 3 wires going the rocker switch, 1 black wire going directly to the thermal block for -12vdc, 1 red wire going to the thermal block for +12vdc and 3 wires going to the taps gage.
(Last week I traced everything down, because my actuator stopped working)
According to Lenco, a 20amp fuse is optional. I guess Tige did not want to spend the 50 cents on my switch.
http://www.tigeowners.com/forum/showthread.php?t=9771Tige, it's a way of life!
Comment
-
I think everything for the taps is wired in with the gauges. So all that would be on the same fuse. Which means the fuse probably isnt the problem.
Check all the wires coming from the taps box...Common Sense is not so Common
Looking for fat chicks for long walks, romance, cheap buffets, and BALLAST.
Comment
-
I own a 2004 22v, and same here, every year, it sticks. Even when I have the boat serviced and ask for this to be checked, still sticks. Now, stuck at 7. Is this something unique to our boats?
I love the wake, couldn't find a sweeter set-up on any other, but this has become beyond frustrating!
Comment
-
I had the same problem, but could not get mine to work. Before I dished out 180 for a new actuator, I took it apart to see if I could fix it. It turned out all it needed was some oil on the bearing.
http://tigeowners.com/forum/showthread.php?t=9928Tige, it's a way of life!
Comment
-
Okay... I was dumb and plugged a broken adaptor for a ballast pump into the 12v adaptor. Taps, radio, blower etc stopped working.
I found the fuse near the pos. on the battery and replaced it (definitely fried). Stoked that I found it after some searching! But... still no blower, taps, radio etc. I found a main accessory 50 amp reset button on front of engine. Pushed it but no affect.
What's next? Any help would be greatly appreciated.
My boat is an 05 Switch V.
Thanks.
Comment
Comment