Im lost without the PW thread!!!!

[skippabcool]

tppcp

[bryce2320]

2.375 net cubic ft, tuned to 32 HZ

[bryce2320]

Going to throw my Alpine PDX1000.1 on the 12w7 in the truck and see how she sounds.

[bryce2320]

Only problem is the clamp ring wasnt on the 12w7 when I bought it so Ive been dicking with JL trying to get a new one headed this way. I have to go thru there dealers tho and its been a pain in the *** to get anyone around here to order it for me

[bryce2320]

Went to go wire the speaker up and guess what

[bryce2320]

The guy didnt have a clue what he had apparently cuz its a 13w7 which is awesome, besides I built the box spec'd for a 12

[bryce2320]

And instead of it being a DVC-3 ohm, its a DVC-1.5ohm. So now I have to wire it up to 3 ohms so Im sure it wont be as loud as playing down at 1.5

[chpthril]

And instead of it being a DVC-3 ohm, its a DVC-1.5ohm. So now I have to wire it up to 3 ohms so Im sure it wont be as loud as playing down at 1.5

Is your amp the PDX1.1000? if so, its 2 and 4 ohm output is the same, so no difference with the sub wired at 3 ohm. Im not sure that amp is stable below 2 ohm, so it probably wouldnt like being pushed above 3/4 volume at 1.5. IMO, you are better off @ 3 ohm, then 1.5 ohm, the amp will like you for it.

There will also be a slight increase in output with the 13 over the 12, but that may be negated depending on the difference in box volume. Both should be fine with a tuned freq. of 32Hz, whats the difference in the recommended volume of the 13?

[Timmy!]

Here's my first crack at engraving plexiglass with the new electric engraver that I got for Christmas. Sandblasting would probably be better for this sort of thing but I don't have space for a booth to do that and an engraver is like $25.

[majestic]

Here's my first crack at engraving plexiglass with the new electric engraver that I got for Christmas. Sandblasting would probably be better for this sort of thing but I don't have space for a booth to do that and an engraver is like $25.

Looks pretty damn good from here Timmy

[chpthril]

Not bad at all Timmy

[Bruizza]

I like it Timmy.

[robert theisen]

Looks great Timmy!

[Timmy!]

Thanks guys! I want to do an amp rack or something with a cover and engrave the Tige, Kicker and WS logos in it to match the stereo equipment.

[Bruizza]

I just want to know when you are ordering your new Z3???