Im lost without the PW thread!!!!

[skippabcool]

No im not sure. I know the heater its self is up under the helm and has 2 hoses going to it and I think its antifreeze in there. Yes, I could definately cover it and put some sort of heater in there and thermostat it at like 70 degrees or something of that sort

You sure it is not water running up to the heater?

[skippabcool]

I've been running no weight in the front, custom sac full, 400 on the opposite side rear and 155lb fat brick on the rear seat corner surf side.

Maybe it was the weight in the front. I will have to try the opposite weight with no front weight.

[Timmy!]

You sure it is not water running up to the heater?

It's water unless it's a closed cooling system which only came in the 6.0 engines.

[skippabcool]

Our after work lake has had an outbreak of blue-green algae...no riding after work now...

Is it just the yuck factor or is there something with the algae?

[Timmy!]

I tried putting my 750# sac in the front walkway as far forward as it would go. I then had a 400# in the starboard side and the custom sac in the port side. For wakeboarding it was great, the rears filled to about 400# and the front all the way. For surfing if I had the 400# opposite surf side it pushed wash into the wave and made it crappy. I emptied that and it was ok. The wave was not as tall. For me I couldn't find a good spot. My buddy who only weighs 150# was surfing way back. The speedset was set at different settings between 11.0 and 11.6. Maybe I need to go slower? There was one driver and two wives in the corner. Water was pretty smooth. I think I like it better with just the weight in the surf corner but will do some more testing.

We tried 800 in the bow, 400 on the opposite side and custom sac full and couldn't even get a wave to form yesterday. Dumped it down to 400 in the front, still nothing. Dumped the front completely and had a half height wave. Dumped the 400 leaving just the one side full and Perfect wave, just like it always is. Can't believe we wasted our time (again) with bow weight.

[halfwatt]

Is it just the yuck factor or is there something with the algae?

Toxic Algae- They said it can cause all sorts of stuff that can really mess you up. Nausea, Skin irritation, etc.

[skippabcool]

Can't believe we wasted our time (again) with bow weight.

Which is funny because several have said that they need it. I have tried putting people up there without luck but figured it wasn't the same as the sacs.

[skippabcool]

Toxic Algae- They said it can cause all sorts of stuff that can really mess you up. Nausea, Skin irritation, etc.

Not good. I wouldn't boat either.

[skippabcool]

Which is funny because several have said that they need it. I have tried putting people up there without luck but figured it wasn't the same as the sacs.

I wonder why lance gets a decent wave and I don't being that the boats are both 22Ve's

[Timmy!]

Which is funny because several have said that they need it. I have tried putting people up there without luck but figured it wasn't the same as the sacs.

The one thing I haven't tried is putting a sac under the helm on the port side. I'd be curious to see what that does but our sessions are limited this time of year so that may never happen.

[skippabcool]

I kinda like that weight in the front hasn't helped. Less weight up there means less chance of getting water over the bow.

[Timmy!]

I wonder why lance gets a decent wave and I don't being that the boats are both 22Ve's

No idea. Why did bow weight for ragboy in his RZ2 but not mine?

[Timmy!]

I kinda like that weight in the front hasn't helped. Less weight up there means less chance of getting water over the bow.

You should see how low my boat is with 750-800 in the bow. Look out for the rollers!

[skippabcool]

You should see how low my boat is with 750-800 in the bow. Look out for the rollers!

Yep. Even with stopping and letting stuff pass you can still get it. If there was chop at all you would have tons of water.

[halfwatt]

What a last play of the game