Originally posted by hyphen79
View Post
Announcement
Collapse
No announcement yet.
Im lost without the PW thread!!!!
Collapse
This topic is closed.
X
X
-
I have the Vent and Drain tee'd. So I am only adding 1 thru hull per side. The existing tanks have 3/4" and I need 1" for the new stuff.Originally posted by lancehon View PostI tee'd my vent and drain lines so now I only use 1 stock thru hull per side. Could you do the same and not have to drill new holes?
Comment
-
Don't you already have 2 thru hulls per side? Mine has 2 per side, I tee'd my drain and vent together and now I have 1 extra thru hull per side for future expansionOriginally posted by mls6722 View PostI have the Vent and Drain tee'd. So I am only adding 1 thru hull per side. The existing tanks have 3/4" and I need 1" for the new stuff.
Comment
-
No, nothing happens. Everything gets turned on when I turn my ACC switch on. It works regardless if the key is in or not. Just have to make sure that your batter switch is turned on.Originally posted by skippabcool View PostJust curious if you move your key to the left or ACC does anything happen now?
Comment
-
Yeah it's everythingOriginally posted by chpthril View PostIf its more then one speaker, then its gotta be upstream like at the amp or head-unit. A speaker can only reproduce whats delivered to it. if one speaker was losing the highs, id say is was a bad tweeter or x-over, but all the speakers is a central problem.Common Sense is not so Common
Looking for fat chicks for long walks, romance, cheap buffets, and BALLAST.
Comment
-
I was trying to remember if anything happened before I made the change, besides the radio coming on.Originally posted by hyphen79 View PostNo, nothing happens. Everything gets turned on when I turn my ACC switch on. It works regardless if the key is in or not. Just have to make sure that your batter switch is turned on.
Comment
-
Originally posted by halfwatt View Postgood evening gents- just rolled in after our first boarding evening at the lake- 77 air, 53 water, no wetsuit - cold.Originally posted by halfwatt View Postwe were pretty stoked - first time behind the boat, figuring out what taps setting works for us, and still tryin to figure out perfectpass...had 3 of us that got wet - my wife led the brigade!


Comment
-
I guess I could have done that - I would have had to change one of the existing thru hulls to a 1" from 3/4" and tee'd the hard tank vent and drain together and added another check valve to the production plumbing also. Adding the thru hull sounds easier.Originally posted by lancehon View PostDon't you already have 2 thru hulls per side? Mine has 2 per side, I tee'd my drain and vent together and now I have 1 extra thru hull per side for future expansion
Comment
Comment