Im lost without the PW thread!!!!

[thtrog]

Oh, today is my weigh day and -40 pounds. I'm at 209 and 10 to go to my goal!

[thtrog]

Got to run, later!

[Timmy!]

Oh, today is my weigh day and -40 pounds. I'm at 209 and 10 to go to my goal!

You're rockin ET! Congrats!!!! I feel like we should have a TO online party or something for when you hit 199!

[lancehon]

Oh, today is my weigh day and -40 pounds. I'm at 209 and 10 to go to my goal!

Sweet

[Ewok]

I was cleaning out some old USB thumb drives and found some pics of my old boat. It was pretty dirty and this was after 2 days of cleaning, polishing and waxing in TX desert summer heat:

[Wakeman22]

Looks real good for such an older boat. I researched a few other cleaning techniques and will try them to see if I can get the water spots off then will take better care each time I pull it out.

[Ewok]

Thanks, it was a 1993 model. Garage kept most of its life, but it had sat for 3 years before I had it shipped to TX.

Using some type of wipe down cleaner like hot sauce or babes kept my Tige looking like this all year long.

[Timmy!]

That was a big boat! Look how much taller than your garage it is!

[Timmy!]

My Corian box build thread over on WW has gotten some decent views, almost 1,600 now.

[Timmy!]

Discuss. Centurion owners are putting these water ski fins on their trim tab plates to eliminate wash on the surf wave. One benefit is that the boat goes straight in reverse.

[Ewok]

That was a big boat! Look how much taller than your garage it is!

It was a big boat, funny thing is that the RZ2 has almost as much interior space, and more seating, and more storage. It's 22'6" without the swim platform vs 22' for the RZ2. It had a bit more interior room and a bigger bow than the 24Ve.

Going to the boat shows I still find it odd that I/O builders don't use the wrap around seating concept which I think opens up the interior room space and allows the passengers to interact better.

[Ewok]

Discuss. Centurion owners are putting these water ski fins on their trim tab plates to eliminate wash on the surf wave. One benefit is that the boat goes straight in reverse.

That looks like a good idea, I think you might need to strengthen the trim tab connection to the boat a bit, I'm not sure if the mounting hardware was designed to handle the side loads from the prop wash.

[skippabcool]

skippa.

I'm considering a new prop so I have a backup. Did you get the different acme prop numbers figured out. Mine is a 537 and I was thinking on the 1235. Just a different size for a back up or to use.

I went with the 1235 and that is what I have been running. I have the 645 that was on the boat as a back up.

[skippabcool]

Oh, today is my weigh day and -40 pounds. I'm at 209 and 10 to go to my goal!

Cool. I got to 210 and went stagnant. I need to start exercising.

[Iwndr]

Oh, today is my weigh day and -40 pounds. I'm at 209 and 10 to go to my goal!

That is Awesome ET Congratulations Man that is sticking to it