G-Money's ballast systems

[G-MONEY]

Was the connection listed in the written instructions?????

I plan to use the same system. Let me know any other things that you like or dislike.

It came with instructions???


The system is solid but I did notice that the water did drain on it's own but I just closed the shutoff valve at the manifold that Andrew put in and everything was fine

[dogbert]

Is it me or does SPBFAN look entirely too enthusiastic about drilling holes in your boat?

[G-MONEY]

No pix at the moment

The water was bat so didn't really ride much.

The wake is solid but I knew what the wake would be like because I already had the sacs just not an auto system.

[eks]

Took the boat out Sunday to test the new system...BTW for all you guys still seeing snow on the ground it was in the 90" water temp was 68.....


We put the boat in the water and flip the switches to fill and about 30 sec later...........

Water is coming out from under the floor

So I shut down the pump and start the investaiagtin.... Smart guy over here forgot to connect the pump to the bag....

After I hooked up the sac everything worked perfectly.


Thanks again Andrew!!!!!!!!!

What about the wake? What do you think? Any pictures?

[TigeDuner]

Was the connection listed in the written instructions?????

I plan to use the same system. Let me know any other things that you like or dislike.

[G-MONEY]

Took the boat out Sunday to test the new system...BTW for all you guys still seeing snow on the ground it was in the 90" water temp was 68.....


We put the boat in the water and flip the switches to fill and about 30 sec later...........

Water is coming out from under the floor

So I shut down the pump and start the investaiagtin.... Smart guy over here forgot to connect the pump to the bag....

After I hooked up the sac everything worked perfectly.


Thanks again Andrew!!!!!!!!!

[xpjim1]

Based on Tall's install it was about 5/8 of an inch

http://www.tigeowners.com/forum/show...7&postcount=30

I know the transom on my boat was about 2 inch thick as it filled the hole saw

[dogbert]

Hey, guys, when you drilled the hole in bottom of the hull, how thick was it? Was it more than 3"?

[xpjim1]

Glad I could help. Its good to have another ballast boy join the club

[eks]

Friday will still be cold but Sunny.

Saturday will be a great day to be out there.

[SPBFAN]

XPJIM, thanks for your help with the electrical. I had to leave town for work and felt horrible that I was not able to help G finish the wiring on the pumps.

[SPBFAN]

EkSilvia it was freezing yesterday in SLC when I flew through. It is supposed to be clear on Friday though.

[SPBFAN]

So G when and where is the party. I know this next weekend is out for me since I am gone all week this week I need to spend time with the three people that are the most important in my life on Saturday.

[eks]

[G-MONEY]

Jabsco sends you the switch with the 3 and 2 reversed.

All we had to do is change the two wires hook it all back up and bingo everything works.

Now we just need to clean up the wires under the dash and take it out to the lake.