Prop Group Buy

[gman]

Lee,
how do you propose to handle the prop puller situation for those that want the c type?

[lee]

Lee,
how do you propose to handle the prop puller situation for those that want the c type?

Send back the puller,hammer and twenty dollars and I will send you a "c" puller.

[Domsz06]

um, I guess I really don't care. As long as it will take the prop off easier then beating it like I did last time I don't care.

[Domsz06]

I would still like to thank lee, say you did an awesome job, and we all owe you one!! If i ever meet you, cold one's on me!!

[spharis]

The harmonic is a better method of pulling. With the style that's in the kit (I guess I should have taken pics), it is very easy to get it on and hit it squarely. It has a nice large surface area.

[Domsz06]

yeah, i see what you mean spharis. it's all good i'm probably not going to worry about it. If it will pull mine off, i'm happy!

[gman]

Domsz06
what type of puller did you use last time?

[spharis]

I tried the new prop out today......3MPH gain on the top end....in very choppy water, and a helluva hole shot!

[Domsz06]

Gman,

Last time I pulled my prop, which was in 04, I just used a rubber mallet and tapped it off. I didn't have a puller. I was told after I did it that you can mess things up. This is why I now have the weekend saver, well I will once it gets here.

[MRMoffat1]

I like the case, tools, etc. However, the harmonic puller received did not match Lee's picture and was a slight surprise. Is this what everyone else got?

[spharis]

Yeah that's it......it will work great. All a puller does is vibrate the prop loose. Works just like seperating spindles from a ball joint, or any other tapered shaft setup. The C-clamp and that style do and work the same way. It is alot easier to hit that style with a hammer than the clamp. Just spin that on by hand if the prop isn't loose, and it will bottom on the prop, then whack the end with a solid hit or 2, the prop will fall off.

[MRMoffat1]

Yeah that's it......it will work great. All a puller does is vibrate the prop loose. Works just like seperating spindles from a ball joint, or any other tapered shaft setup. The C-clamp and that style do and work the same way. It is alot easier to hit that style with a hammer than the clamp. Just spin that on by hand if the prop isn't loose, and it will bottom on the prop, then whack the end with a solid hit or 2, the prop will fall off.

Excellent - and thanks to Lee - everything arrived. I really like the case. I've had a Tige since 1999, but never a spare prop and puller. We plan a trip to the Columbia River (Crescent Bar) this summer, and I figure - now's the time for a spare, especially with the deal we got here.

[spharis]

Are you going to do like me and have an old spare? My ratted out prop is in my kit now.

[gman]

lee, is it possible to return the whole prop puller kit order?

[xpjim1]

gman

check your pm's