Let us know how it surfs!!!!
Announcement
Collapse
No announcement yet.
Out with the old 24ve to a huge upgrade! 2020 5ZX!
Collapse
X
-
Surfs amazing. The new taps3t is so easy to use and dial the wave to the riders preference. Stock ballast with plug and play is all we rode with this past weekend and I probably will leave it at that. The wave is clean and long on both sides with tons of push.Originally posted by Cooter View PostLet us know how it surfs!!!!
834E637F-2533-47FD-A946-B22DE2A53259.jpg
8572D383-889B-4416-8923-D65417668892.jpgLast edited by akdoc; 08-13-2019, 01:22 PM.
Comment
-
Congrats man. I don't know if they changed the ballast setup at all, there are 750's in both rear lockers, 400's under the bow seats and I added a piggyback sack that sits under the long bench on the port side. I left some ballast connectors in the storage in front of the observer seat as well. I fill everything and add a wake shaper to the side. I did have 250 pounds of lead scattered through the boat but took that out when we traded it in. We would usually go about 11-11.5mph with Taps around 3 or so. If you have a lot of people in the front you can run taps a little higher around 5 or so. The wakeboarding wake is very good around 21-22.5 with no ballast, or fill the ballast but you'll have to speed up to around 23.5 to 24. If you have any questions let me know man, we really enjoyed that boat it was so solid for us for all those years!!Originally posted by Jsmithey View PostCongrats on the new tige! I just happened to stop by performance Marine and work out a deal on a nice 06 24ve. 1 owner boat, looks like the previous owner took good care of it. Looks a lot like the one in your avatar. So what do I need to get it throwing a nice surf wave?
Comment
-
I used the swell wake shaper and it worked well. I know performance has some different ones in stock so I'd just pick one up there! You keeping the boat at the lake of the ozarks?Originally posted by Jsmithey View PostThanks for the info. They are still going through the boat, I hope to pick it up this week sometime. Any recommendation on what wake shaper worked well on it?
Comment
Comment