Announcement

Collapse
No announcement yet.

Fly High W005-P

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fly High W005-P

    Fly High W005-P Tige surf sac for the port side.

    This sac is primarily designed as a plug-n-play upgrade to the 2010-2014 Surf or Pro level aft locker ballast sacs. It has the 4 corresponding threaded ports, as well as two additional. It will also work manually filling with a W709 Pump kit or plumbed in on a boat with base level or no ballast. Due to its size, it is a very good fit for the R20 and RZR, but will certainly work in other Tige boats. It can be used in the 2015 models that have no ballast or still use the wedge shaped 350 OEM surf sac. It just needs a little reworking of the boats plumbing.

    Now, there are some specifics regarding this sac, that you need to take into account. This sac was new and never installed in a boat, but is an open item. It was incorrectly labeled as a starboard side sac when shipped to the installer. Without realizing it was the incorrect side, the installer glued five (5) W743 fittings into the sac. 2 on the bottom, 3 on the top. This will make it a little tricky as 1 or more of the W743's will need to be capped. I will work with the buyer to help work around these glued in fittings, based on your application.

    Sac retails for $539.00. Im willing to part with this W005-P for $300.00 + freight. I will include (1) W731 wally plug and (4-5) W746 female quick-con 90.







    Please asked all the questions you want. I want to make sure this will work for you, before completing a final transaction.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

    #2
    Sorry! Just re-read which boat it was for. Doesn't look right for my application.
    Last edited by 007; 12-07-2015, 07:41 PM.

    Comment


      #3
      Mike,

      How does this sac compare to the custom 22ve sac as far as dimensions?

      Comment


        #4
        Not as wide, not as tall, not as long in the leg. About 300 lb less then my Ve custom.
        Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

        Comment


          #5
          too bad it's port side. I need a goofy side sac.....
          2012 22ve.. RIP 4/17
          2014 Z3.. Surf away

          Comment


            #6
            Originally posted by sandm View Post
            too bad it's port side. I need a goofy side sac.....
            For anyone else, its only a port side as it pertains to a 2010-2014 tige with the surf/pro ballast level. In any other model, its not relevant.
            Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

            Comment


              #7
              I think we'll take it Mike.

              Have separate fill, drain and vent connections currently.

              Comment


                #8
                Sac is sold, thanks!
                Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

                Comment


                  #9
                  [QUOTE=chpthril;755955]Sac is sold, thanks![/QUOTE
                  Hello, chpthril!
                  Wrote you in private.
                  Alexander.

                  Comment

                  Working...
                  X