That one is water injected and you don't want it. You might call them or call Nelems Marine in Jasper they are good people. 205 221-3072
Announcement
Collapse
No announcement yet.
Replacing flax packing
Collapse
X
-
finally...
Finally got the boat in the water for the first time this year on Sunday. Had the wife with me so I was able to adjust the stuffing box/Flax packing. Which was much easier than I had anticipating. Everything I read said to put the nut on hand tight plus a half turn. Well, that was way to tight and the stuffing box was HOT after just a few minutes. Turned out that the correct adjustment was about a 1/4 turn in from leaking sitting still... if that makes sense. Anyway... we rode for about an hour and checked it again, no leak and not hot!!!
I'm still waiting to hear back from Nelems on the Packless shaft seal... but for now I'm on the WATER!!!! Now if it would just warm up enough to wakeboard.
--chris
Comment
-
Originally posted by shane
I just had the PSS installed on my 1999 22V and it is great the bottom of the boat stays dry almost all day long now. The bilge pump never kicks on anymore. Just call andrew or harvey at TIGE and they can hook you up with the right part.
Comment
Comment