Wetsounds Setup

[Ben_DipWrap]

Hey everyone!

looking to add some sound to the boat for next summer. Currently have the stock setup with only 2 Rev10. Looking to add 2 more Rev10 and one more Wetsound subwoofer. Do you guys think 2 Syn6 amps will be enought to run everything?

[Greeko]

the Syn 6 doesn't really add very much power to the system per channel.

IMO you would be better off properly powering your tower speakers, sub and speakers.

Rev 10 - 300-400 watts
XS 650 - 150 Watts
XS 808 - 200 Watts
WS Sub - 500 Watts minimum

The syn 6 is nice..but won't push that much power..

[chpthril]

The Syn-6 will deliver 200W rms to a pair of tower pods bridged on chnls 1/2 and 3/4. Thats nearly identical to what the current tower pods are receiving from the OEM installed Syn-2. The existing amp will drive a 2nd pair, so the 2nd Syn-6 would not be needed for that.

A syn-6 to drive a 2nd woofer could work. What woofer? If it was me, Id pick up this Syn-2 instead and go with something like the XS-12. Ported enclosure in the port side midship locker and vent the locker. http://www.tigeowners.com/forum/show...FA-S4-FOR-SALE

The OEM spot for the existing XS-10fa could use some work as well. its too closed off from the gunwale cavity to optimize the 10fa. In the pic below, we sealed the cavity to best suite a different woofer, but to retain the 10fa, id open up that back wall. the 10fa needs more volume.

[Ben_DipWrap]

I was looking for a second XS-10fa. So you would put the second one INSIDE the locker and only vent it with some traps? im not sure to understand well

[chpthril]

Due to the placement of the OEM installed woofer, there is NO good place for a 2nd woofer in an ASR. Yes, in the port mid-ship locker. Not sure what traps are, but the woofer is throttled if not allowed to vent. The 10fa would not be my first choice, but it will work.