Im lost without the PW thread!!!!

[skippabcool]

Does the hose coming off this pump look like it will be a problem?

[skippabcool]

More pics in my thread

[skippabcool]

I am hoping that I tied the breaker in correctly. I put a ring on and tapped into one of the screws for another breaker.

[chpthril]

Does the hose coming off this pump look like it will be a problem?

No.

[skippabcool]

For the nylon clamps is it better to have the hose heated so it is tighter? Do I just squeeze them as tight as I can get them?

[skippabcool]

Double post.

[chpthril]

I am hoping that I tied the breaker in correctly. I put a ring on and tapped into one of the screws for another breaker.

As long as you went to the B+ supply side of that breaker and not the load side of that breaker. other wise, the draw of the pumps will be pulling through said breaker along with what ever load its wired to carry. it could trip is all loads where on at once.

[skippabcool]

Double post.

Now its gone

[chpthril]

For the nylon clamps is it better to have the hose heated so it is tighter? Do I just squeeze them as tight as I can get them?

No need to heat the hose. Just pinch them closed with a little force using a pair of slip-joint pliers.

[skippabcool]

As long as you went to the B+ supply side of that breaker and not the load side of that breaker. other wise, the draw of the pumps will be pulling through said breaker along with what ever load its wired to carry. it could trip is all loads where on at once.

The load side on all of them are a terminal and the line is a screw into the buss. I chose the bilge one, only because I was looking at the 40 amp per buss and went with the one that had the least amount of amp based on breakers. The bilge because it made the connection look good.

[skippabcool]

No need to heat the hose. Just pinch them closed with a little force using a pair of slip-joint pliers.

I guess if they break that was a little too much force.

[Iwndr]

Does the hose coming off this pump look like it will be a problem?

Doesn't look like it could ever leak

[skippabcool]

Mike I was going to ask you, do you work alone or have some workers? I can't imagine doing everything myself.

[skippabcool]

Doesn't look like it could ever leak

That is what I am hoping

[dingleberry]

Dinglets baseball scrimmage starting now. At least the wind has died down.