Im lost without the PW thread!!!!

[houstonshark]

Houston has a problem

Yes, I do. I can't leave well enough alone. But in this case, I'd say I can't leave 'so so' alone because that's the results I was getting out of TAPS in its stock form. No usable range and poor hole shot.

[dingleberry]

Maybe Dr will answer your question

hopefully he hasn't put me on his "ignore" list

[thtrog]

Yes, I do. I can't leave well enough alone. But in this case, I'd say I can't leave 'so so' alone because that's the results I was getting out of TAPS in its stock form. No usable range and poor hole shot.

I understand, I knew somone who went from a 21v to a Z1 and it drove him crazy that he couldn't use the full range he was used to. Looks like Tige would address this...

[houstonshark]

speaking of TAPS - had a little issue last weekend

when we launched, the TAPS was really really slow to respond and lower down, it got better over a couple minutes, and was back to normal for the rest of the day

checked the fluid reservoir after we were done, and it was in the correct range

Can you calibrate it on your boat? That's usually the first thing I do when I get on the water. Of course the Tige Touch makes that pretty easy.

Calibrating mine usually fixes any issues. My guage was acting up on Saturday. I calibrated it and all was well. Turning the boat off and back on has helped in the past too.

[Iwndr]

guess that was a mood killer...all the hoes disappeared

I was at Lunch in the conference room

[dingleberry]

Can you calibrate it on your boat? That's usually the first thing I do when I get on the water. Of course the Tige Touch makes that pretty easy.

Calibrating mine usually fixes any issues. My guage was acting up on Saturday. I calibrated it and all was well. Turning the boat off and back on has helped in the past too.

Not aware of any way to calibrate it.

[thtrog]

I'm about to hit 75k on my truck.

[thtrog]

I do need to get tires for my wifes Yukon soon.

[Timmy!]

This one on Nwwwso FB site:TWP Carbon Pro Model for Sale $400 - Brand new - Deck is blemished but board is solid.

What size is that?

[Iwndr]

The girls at the office got me this for Bosses Day

[IMG][/IMG]

[dingleberry]

what a horrible way to die - cooked alive in a giant tuna processing steam oven

http://www.cnn.com/2012/10/15/us/cal...html?hpt=hp_t3

[Timmy!]

I'm low miles on a truck for once, only 66k in 5 years.

[Iwndr]

What size is that?

4'6"

[Iwndr]

speaking of TAPS - had a little issue last weekend

when we launched, the TAPS was really really slow to respond and lower down, it got better over a couple minutes, and was back to normal for the rest of the day

checked the fluid reservoir after we were done, and it was in the correct range

Probably a cold Anode.....

[dingleberry]

Probably a cold Anode.....