Announcement

Collapse
No announcement yet.

Wheel Bearing and Rotor Removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wheel Bearing and Rotor Removal

    I had a tire blow out last time I towed the boat to the lake. After the blowout, dropping the boat at the lake and bringing the trailer back to the house I found that after the blow out the trailer oil bath wheel bearing is now leaking.

    I am now trying to remove the bearing from and rotor from the trailer and having a problem. Any suggestions?

    2004 Extreme Dual axle trailer.

    #2
    Is it the inside bearing thats the issue..meaning backside... probably got hot and fused to the spline possibly... if a rubber malott wont break it free.. you can try taking a torch to heat it up and see if that helps I assume it wont come off the shaft is your issue.
    Last edited by WakerideN; 07-15-2013, 02:36 PM.
    2011 Tigé RZ4
    www.re-viveupholstery.com

    Comment


      #3
      Problem is that the oil is leaking from the oil bath unit at the front. So if I fill the oil bath cover it leaks all over the wheel.

      Comment

      Working...
      X