Fresh Air exhaust group buy???

[chpthril]

They have one listed for an 06 24ve with a fiberglass platform. What is the difference between the 24v and the 24ve??

Very little, but thats all it needs to not fit. It only takes about 10 minutes to take the measurments, You can print the pics off thier website to do the measurments.

[xpjim1]

Basically they will fit any boat, If your boat is not listed then there is a link to a form you print out and you do a few measurements to send to fresh Air Exhaust.

[wfsims]

jleger98, I have followed the replies, I printed the measurement template, and will plan to measure, as they have they do not have the measurements for the 98pre2002. I will be in for the 20 % discount, and wait to see if others want in. thanks for looking in to this.

[jleger98]

jleger98, I have followed the replies, I printed the measurement template, and will plan to measure, as they have they do not have the measurements for the 98pre2002. I will be in for the 20 % discount, and wait to see if others want in. thanks for looking in to this.

I did make the query about your boat, so don't run off and measure just yet. They have one for my boat, but it wasn't listed on their site, so they may have it already.

[jleger98]

I may be interested if I can get one that will fit my 06 24V with fiberglass platform. Let me know.

If you want I can inquire for your boat as well.

[Domsz06]

i'll bite this time. I have some extra money around, so keep me in on the loop. Everyone swears by it. I agree I think it's way$$ for what you get, but it's supposed to be worth it.

[jleger98]

i'll bite this time. I have some extra money around, so keep me in on the loop. Everyone swears by it. I agree I think it's way$$ for what you get, but it's supposed to be worth it.

Sweet.

[ctcranor]

FAE

I'm counting 5 (or 6)? I'm in for the 20% at three and not trying to be cheap but is there another price break somewhere we should be aiming for?

Thanks for all your work!!
Chris
ctcranor@hotmail.com

[NICKYPOO]

Measure anyways. You never know.

Will somebody with an FAE please take SP for a ride. Sheesh Dude. If you want to truck on out to Reno, I'll take you out.

[Domsz06]

yeah because we could open this to other forums

i'd like to get it down under 300. I just don't see how they are so $$ when there is so little material.

where is anhaney? he said he knew a shop that could make them, least I thought he did.

[xpjim1]

Here is the post from R&T BABICH did a preliminary cost estimate for parts.

The entire FAE kit is stainless and most is not available at your local hardware store.
But, it's not that hard to find the parts:
McMaster Carr - (16) 3" SS hose clamps - $19.
3' x 5/16" SS threaded rod - $ 6.92
3' x 1/2" SS round tubing - $15.63
Go2Marine - 3' x 3" flexible exhaust hose - $11.05
JC Whitney - 1 set SS header reducers - $39.99
(Note: not the correct part, but similar configuration to the flange pipes)
eBay - 3' x 3/4" SS square tubing - $13
3' x 3" x .065 SS tube - $52.00 (includes shipping)
local store SS screws,washers & lag bolts - $ 6.00
?? nozzle - ??
Total $163.59 + ?? + shipping

Next is cutting,angle cutting,deburring,drilling,welding,grinding,powder coating.
I'm collecting parts for a hot shower and heater system and can weld, but I elected not to tackle this one.


Just an FYI

[xpjim1]

And I agree with Nickypoo. Measure. That way you will insure a proper fit. talltigeguy and I have the same boat. When we ordered our measurements were slightly diferrent.

[jeremiah22]

If you want I can inquire for your boat as well.

That would be great, but I can also measure if I need to.

[sacnvr2l8]

I'm in

Count me in I'll do it...06 20V

[jleger98]

I've inquired to see if there is another discount level. Have not heard back just yet. If I get a chance, I'll just call down there this afternoon.