FAE Group Buy

[robricketts]

I just ordered one. It took two weeks but I have it now. Season is over in Canada but it's on and ready for next summer.


Sent from my iPhone using Tapatalk

[BurnMac42]

I might have missed if in another thread or further back in this thread but is there any concern about a warranty claim being denied based on having an FAE?

[Dandy]

If anyone puts this through you can count me in for 1 FAE. I believe in the past if we can get 10 the discount increases.

[KyleRass41]

It looks like we are at 4......Still need 1 or 6 to get a discount!

[talltxnguy]

Well if they will count the one I just bought three days ago you have your 5th. I found out about it on this forum...

[mschmidt33]

How much for an RZR? 343PCM single exh. Might have another guy interested with a Z3 with Raptor 400 single exh.

[KyleRass41]

I'll take a look tomorrow morning and let you know.

[KyleRass41]

Looks like 460 without flappers(+$35) and without blended welds(+$45). That is without the discount. I believe it will be around $50 off.

Let me know if you and him are in and I can shoot an email to FAE.

Thanks!

[Dandy]

KyleRass41. Just to confirm again, I am for sure in for one. 2007 22Ve.

What are people's thoughts and feedback on the flappers? Yes or no? I would be opting for one piece blended welds, not polished.

I have not been on as much lately and have some traveling coming up as well. If this group buy happens, someone please PM me an I will get the notification via email. Thanks.

[KyleRass41]

Nice! That easy. Thanks!

[Dandy]

REMINDER: For those of you looking at a one-piece T or Y, you will need to provide measurements to FAE for them to assemble your unit. Be sure to contact them and get this form before you store your boat for the winter, unless you have access to it.

We are taking our boat in on Monday and may not see her til Spring. I contacted FAE today via email and they quickly sent me the document stating which measurements are needed.

[Jetdriver]

KyleRass41. Just to confirm again, I am for sure in for one. 2007 22Ve.

What are people's thoughts and feedback on the flappers? Yes or no? I would be opting for one piece blended welds, not polished.

I have not been on as much lately and have some traveling coming up as well. If this group buy happens, someone please PM me an I will get the notification via email. Thanks.

Flappers aren't need with the FAE, a lot of new boats don't have them at all because the exhaust pipe is angled into the water. This is the case with the FAE attached. You won't have to worry about water surging into your engine. I elected to skip them after talking to Larry at FAE in length about exactly this issue. I ran my boat all this summer without them with no issues at all.

[jeremiah.hough]

are these necessary or even possible with a vx?

[Germaine Marine]

If your boat is new/under warranty still, do what Larry says, which is GO FLAPPERS. I would rather be safe then sorry with a brand new boat.

[D&P Powell]

We just ordered our 2nd FAE (had one on our previous boat) today. According to Christina at FAE, they will be raising their prices a little bit at the end of the month. I just wanted to put that information out there in case someone is considering it as a winter project.