GOPRO hooked up to video on Tige touch

[DrPorter]

IMG_0055.jpg

All you need is a video cable http://www.monoprice.com/Product?c_i...seq=1&format=2
IF you never want to worry about a battery http://www.monoprice.com/Product?c_i...seq=1&format=2
along with a usb cigarette converter http://www.monoprice.com/Product?c_i...seq=1&format=2

And a proprietary gopro combo cable http://www.amazon.com/GoPro-ANCBL-30...ro+combo+cable

I ran the video cable to the viper box under the drivers dash and the usb cable to the nearest 12v power point

I think the total cost was less than $40 in parts

[gibbs114]

My dealer hooked mine up and it works great!


Sent from my iPhone using Tapatalk

[gibbs114]

Not sure how mine is hooked up it only has one wire!


Sent from my iPhone using Tapatalk

[CarFanatic]

I wondered if this could be done!!!! All you need is that 25 ft cord and the av input cord for the go pro?? where did you plug it in on the computer board?

[DrPorter]

I wondered if this could be done!!!! All you need is that 25 ft cord and the av input cord for the go pro?? where did you plug it in on the computer board?

Yes that is all you need. it plugs into the first video in slot on the blue viper box under the drivers dash.

[CarFanatic]

so if its just video. you would just need one plug right?

[mnpracing]

can you view it on the TT screen only when it's in Record mode, or anytime the camera is on? Thanks for sharing the links and info.

[DrPorter]

so if its just video. you would just need one plug right?

Yes you only need one plug.

If you want power sent to your go pro then you also need a USB cable

[DrPorter]

can you view it on the TT screen only when it's in Record mode, or anytime the camera is on? Thanks for sharing the links and info.

You can watch on TT screen when ever the camera is on. I use the go pro remote to toggle record on and off. The TT screen shows when it's recording and what the resolution and camera mode is

[mnpracing]

anyone know whether this set-up only works with all go-pro's, or just the Hero3?

[DrPorter]

anyone know whether this set-up only works with all go-pro's, or just the Hero3?

The only thing that changes is the proprietary cable from gopro. Just order the one compatible with your camera

[HoopsMT]

DrPorter......Did you cut thru the GoPro case to connect to the camera? I notice the floaty, is that just to recover the memory card? Assume if the camera gets dunked...it's all over. Has the suction cup worked?

Thanks.

[CarFanatic]

they need to make a wireless, or blue tooth connection for the tige touch to pick up the go pro

[1sicktige]

X2 how did u plug the camera with the case on?

DrPorter......Did you cut thru the GoPro case to connect to the camera? I notice the floaty, is that just to recover the memory card? Assume if the camera gets dunked...it's all over. Has the suction cup worked?

Thanks.

[gibbs114]

I drilled a hole where the plug goes.You can also buy a Skelton case with a hole. I still need to ask the dealer about my plug I only have one wire ran and it powers and plays on video 1. All there boats are wired that way.


Sent from my iPhone using Tapatalk