Z3/Z1 Custom Ballast Bags Group Buy

[CarFanatic]

Robert must be busy. I sent him an email and haven't heard anything either.

[ragboy]

I was traveling, AGAIN. Sorry. They are supposedly on the way. I will let you know first them Brandon.

[CarFanatic]

No problem! Just let me know! I'm in for a set.

These are the same bags the ewt boats used right? Do I need fittings for them or do they come with them?

[ragboy]

They are the same ones, and the same ones in our most recent videos, like RJs mywake run.

You will need fittings, you can get a kit at CMS depending on your hose size.

[CarFanatic]

Awesome!! My 2014 is set to start its build anyday now like we talked about on the phone. So hopefully cms will have a kit for it! Let me know when I can purchase! Thanks Robert!!

Brendan

[NHarp1]

I would also like a set for the Z3 if available.

Ironpeddler, did ragboy respond to your request?

[CarFanatic]

Ragboy has been out of town for the reveal. He did all the internet stuff. He said he'd let me know as soon as the bags came in.

[ragboy]

As soon as we have the few in that are coming, I will post and you can order.

[CarFanatic]

Dibs on a Z3 Set!

[luke]

Gota say thanx ragboy I'm completely happy with mine I did cross vent and ad check valves a must thanks !!

[CarFanatic]

How did you do that!?

[luke]

How did you do that!?

Just get some hose from Home Depot some hose clamps extend the drain hose to opp side of boat then get a couple check valves in the fill lines witch keeps you from losing water out fill pumps one check per fill line got my check valves from wake makers but ragboy may have a line on some also

[CarFanatic]

Ah so you vent out the oposite side? That has to be some long hose. Any one have a diagram on this?

[luke]

Ah so you vent out the oposite side? That has to be some long hose. Any one have a diagram on this?

No picture my boat is at the dealer getting winterized you run the lines back behind the motor and zip tie them up so they won't move

[chpthril]

Ah so you vent out the oposite side? That has to be some long hose. Any one have a diagram on this?

And drain. We do it with most of our ballast systems with the taller sacs. On each side of the stern, you have a vent and drain thru-hull. All you do is pull the hose off all 4, and extend them to the other side of the boat and reconnect them to the thru-hulls. Is about 10-12 ft per hose.