2012 RZ2 has landed!

[2thdoc01]

If I had a chevy.....I wouldn't wash it, instead I'd drive straight to the Toyota dealer to trade up.

If my aunt had nuts, she'd be my uncle....so what?!

Do they make a toy that costs more than 25 k and has a diesel?

[Nobody]

My chevy always comes back washed from an oil change...and the truck cost me 20k LESS then the Tige! LOL

If I had a chevy.....I wouldn't wash it, instead I'd drive straight to the Toyota dealer to trade up.

[Dan and Christy]

My chevy always comes back washed from an oil change...and the truck cost me 20k LESS then the Tige! LOL

I know... ... but, duallies are too big to go through the dang car wash at the dealership.

[Ewok]

My sales guy said he has seen the boat jockeys drop them hard when they move the boats with the tractor....so you know they have seen it...why not order me a new one and put it on before i get there?? They had the thing for 2 weeks!

The tower is just noisy when lowering it...springs are noisy on one side...not sure if i can fix that??

Major fail on not cleaning the boat, even my Bayliner dealer washed the inside and outside of the boat when I took it in for service.

My tower is solid with no rattles when it's up but the sprigs do make a noise when lowering the tower, that seems pretty normal to me, they aren't gas struts.

Your dealer knows about Tigeowners.com right? They should know we all compare dealer service and have minimum expectations from dealers, such as a fixing their mistakes before you show up and cleaning a boat they got dirty while they had it for service.

[2thdoc01]

Fortes Inboard always washes and vacuums their boats after service. Never a finger print smudge anywhere.

My chevy always comes back washed from an oil change...and the truck cost me 20k LESS then the Tige! LOL

[2thdoc01]

Totally unacceptable. How does a dealership not even wash it? It's such a simple thing. It's a half hour job for a $10 an hour guy.

Most places I've seen use a forklift to move the boat and it would be real easy for some lazy mechanic (we know it ain't the detail kid) to break it because he was too lazy to tilt it up and who then doesn't say chit because they don't want to get busted for it again. I wouldn't leave until it was either fixed or the new part was ordered.

Does the tower groan under load or it is all the time?

I curious to hear how the fix goes. Keep us updated.

My sales guy said he has seen the boat jockeys drop them hard when they move the boats with the tractor....so you know they have seen it...why not order me a new one and put it on before i get there?? They had the thing for 2 weeks!

The tower is just noisy when lowering it...springs are noisy on one side...not sure if i can fix that??

[Nobody]

Totally unacceptable. How does a dealership not even wash it? It's such a simple thing. It's a half hour job for a $10 an hour guy.

Fortes Inboard always washes and vacuums their boats after service. Never a finger print smudge anywhere.

[NICKYPOO]

Got the boat back today from 20 hr service.......here is the update.

Hatch is fixed...nice and solid. The service manager commented that the new hatch looks like the old one, BUT is much much heavier....

Looks like the battery warning in acc is normal......???

Taps gauge adjusted

Came back dirty from sitting in lot....gee, I was hoping they would detail it since it was filthy when I got it....FAIL

They broke my Fulton jack.....cracked one wheel off and the other is hanging by a thread. They had it for 2 weeks while I was on vacation...and didnt notice it?.. FAIL

Tower groans like my back on a sun morning....say its normal....??

Rick was going to send me some Tige stuff to " make up" for the trouble.....haven't seen it...FAIL

Got my prop fixed.

So.....I guess that's it for now.

Totally unacceptable. How does a dealership not even wash it? It's such a simple thing. It's a half hour job for a $10 an hour guy.

Most places I've seen use a forklift to move the boat and it would be real easy for some lazy mechanic (we know it ain't the detail kid) to break it because he was too lazy to tilt it up and who then doesn't say chit because they don't want to get busted for it again. I wouldn't leave until it was either fixed or the new part was ordered.

Does the tower groan under load or it is all the time?

I curious to hear how the fix goes. Keep us updated.

[trent]

Got the boat back today from 20 hr service.......here is the update.

Hatch is fixed...nice and solid. The service manager commented that the new hatch looks like the old one, BUT is much much heavier....

Looks like the battery warning in acc is normal......???

Taps gauge adjusted

Came back dirty from sitting in lot....gee, I was hoping they would detail it since it was filthy when I got it....FAIL

They broke my Fulton jack.....cracked one wheel off and the other is hanging by a thread. They had it for 2 weeks while I was on vacation...and didnt notice it?.. FAIL

Tower groans like my back on a sun morning....say its normal....??

Rick was going to send me some Tige stuff to " make up" for the trouble.....haven't seen it...FAIL

Got my prop fixed.

So.....I guess that's it for now.

About a week ago I noticed one of the wheels on my Fulton jack was literally breaking in half. I just got through replacing it. Easy to replace but It just shouldn't happen!

[skippabcool]

Does anybody want to hear my answer?

I guess nobody does.

[NICKYPOO]

Does anybody want to hear my answer?

[2thdoc01]

Got the boat back today from 20 hr service.......here is the update.

Hatch is fixed...nice and solid. The service manager commented that the new hatch looks like the old one, BUT is much much heavier....

Looks like the battery warning in acc is normal......???

Taps gauge adjusted

Came back dirty from sitting in lot....gee, I was hoping they would detail it since it was filthy when I got it....FAIL

They broke my Fulton jack.....cracked one wheel off and the other is hanging by a thread. They had it for 2 weeks while I was on vacation...and didnt notice it?.. FAIL

Tower groans like my back on a sun morning....say its normal....??

Rick was going to send me some Tige stuff to " make up" for the trouble.....haven't seen it...FAIL

Got my prop fixed.

So.....I guess that's it for now.

[Nobody]

Nobody CONGRATULATIONS ! on 2000 posts!

Thank you very much. I feel like it's my birthday or something.

What do I get?

And Nickypoo....don't you dare answer!

[robert theisen]

Five times? Ms. Nobody is my grammer nazi, so you can be my name nazi. Correll, Cordell, Corell, Cor-what-ever...........

I put the 808's in the bow of our RZ4..did you see the pictures??

http://www.tigeowners.com/forum/show...t=17918&page=2

Nobody CONGRATULATIONS ! on 2000 posts!

[Nobody]

You crack me up Nobody! You go from asking who Rick Correll is to misspelling his name 5 times in a reply. Oh well, at least everyone (and Nobody) now knows who he is and that he reads these boards.

Five times? Ms. Nobody is my grammer nazi, so you can be my name nazi. Correll, Cordell, Corell, Cor-what-ever...........

I put the 808's in the bow of our RZ4..did you see the pictures??

http://www.tigeowners.com/forum/show...t=17918&page=2