A while back I posted a question about moving my WS Pro 485 to the top of my tower - this was b/c it does not fit with the standard clamps on my factory Tige tower. With some help from Jason B, I ended up having a local fabrication shop fab a bracket. See pics below. The piece mounts directly in the speaker mounting holes, then he welded the original gear looking piece onto the new plate - moving the brackets out by two inches. This will allow it to fit on my tower. Cost me $95 for the plate, with black powdercoat finish.
-
-
Arrow in pic 3 shows the piece that he put on the bottom of the plate that sets right into the existing slots on the speaker. -
pics of the tower? I dont get why you would need that plate. Do you have a samson Tower ?www.1320diesel.com Home of the Fastest Diesels!
http://youtu.be/dEDdM0Y3IGs?hd=1Comment
-
Nice job! Looks great.
Tim
Wet SoundsComment
-
The original tower on an 04 22v has cross pipes at the exact spot the 485 is to mount. See attached photo, although its not that great. Previous owner built a little T pipe that bolted to the plate in the middle of the tower, and it dropped the speaker another 3-4 inches or so. This new bracket eliminates that large drop.Originally posted by Wickedcummins View PostComment
-
It's great one folks like you think outside the box. Thanks for sharing.Comment
-
Sweet!!!
Great job there. . Once hooked up, I bet hardly anyone would even be able to tell it is not stock.Be excellent to one another.Comment
-
Guys, just got it mounted tonight. I can't suck the clamp all the way closed - see pic. Is this gap okay, or should I order the different inserts?Comment
Comment