This weekend, I noticed my TAPS plate was not working correctly. We rarely change it's position, but for some reason I tried. It will only go down to 4. It will then go back up to 8, but won't go below 4. While in the water I tried to apply some force, just in case there was a catch or something, but still wouldn't go down any further. It is not the signal back to the dash. I've confirmed it only moved down to that 4 position and no further. Additionally, I did notice that the TAPS switch on the throttle is a little sticky on the "up" position. I don't think that has anything to do with the issue, but just something I noticed. Please let me know if there is something I can check.