Announcement

Collapse
No announcement yet.

21 Z3 tabs not deploying

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    21 Z3 tabs not deploying

    Have been having intermittent issue with tabs not deploying in surf mode. Has now become all the time. I have gone into dealer mode to make sure tabs actually work and they do. I have now resorted to just going into the manual demo mode and activating them there when I surf. Any thoughts on why they are not deploying?

    #2
    Is the is the speedo working? Is the GPS puck covered up?

    Comment


      #3
      I had a similar problem with my port side tabs having intermittent problems deploying… check the relays and make sure the post of where the actuator line is screwed on to is tighten.

      Hope this helps


      Sent from my iPhone using Tapatalk

      Comment


        #4
        Lee, Speedo is working. Only appears to be affecting surf left (starboard tab). If I cycle the “switch” surf side a couple of times it will deploy.

        Comment


          #5
          Ipm983, I’ll check connections. Where are relays located?

          Comment


            #6
            Originally posted by boonecragun View Post
            Ipm983, I’ll check connections. Where are relays located?
            It sounds exactly the same problem I had… DM sent


            Sent from my iPhone using Tapatalk

            Comment


              #7
              Had same issue with the starboard taps plate intermittently working. Ended up being the relay was bad but before that it had actually over extended the taps plate and bent it at the bracket! Thankfully both replaced under warranty and now it works perfect.

              Comment

              Working...
              X