Announcement

Collapse
No announcement yet.

operating temperature

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    operating temperature

    What is the operating temp of an RZX2 with Raptor 400?

    #2
    158-164 normally


    Sent from my iPhone using Tapatalk

    Comment


      #3
      So on full throttle tonight mine got up to 178

      when i back down to 30-31 mph, it was in the 160’s

      thoughts?

      Comment


        #4
        you're fine
        Germaine Marine
        "A proud dealer of Tige, Supra, Moomba and ATX performance boats"

        Comment


          #5
          Nothing to worry about


          Sent from my iPhone using Tapatalk

          Comment


            #6
            My question would be why are you running at wide open throttle for sustained periods of time??

            Comment


              #7
              Sustained periods of time......like when the lake is smooth at dawn and you are getting back To your dock.....talking 2 minutes........you trying to say these boats can’t be run on smooth water at the top end??? By the way, 4th inboard and 2nd tige.....the oil pressure and operating temps of these motors are missing in the manual, which is why the post

              Comment


                #8
                Just don't believe running at 5000-5200 RPMs is worth it in the long run. Just my opinion. They are tractors. Would rather cruise 24-26 down in the 4k range. Its the same block and internals as 6.2 f250/f350 gasser. I wouldn't run one of those at 5k for two minutes sustained either,, but thats just me..Everyone's mileage varies. Was just curious, not judging.

                Edit, blew it on the duplicate upload..
                Attached Files
                Last edited by freeheel4life; 06-26-2020, 04:18 PM.

                Comment


                  #9
                  You also happened to post a machine that costs more then one of these boats freeheel!


                  Sent from my iPhone using Tapatalk

                  Comment

                  Working...
                  X