new RZ2 ballast bags question

[dcsnowwake]

so I think im going to purchase the enzo fly high surf sacs for both sides.
do you think they will fit?
i will most likely pull the cooler on the onse side out as i usually usa a huge portable one.

and also will the fly high bow sac fit underneath the bow seats?

what do you all think?

[CP3]

bow sac will fit. Im not sure about the enzo sac on the shorter side. Juse measure it. that enzo sac is huge and $$$

[chpthril]

I dont know if the "V" shaped bow sac would fit in the "U" shaped bow of the RZ don't they use 2 sacs up there know?

[dcsnowwake]

I dont know if the "V" shaped bow sac would fit in the "U" shaped bow of the RZ don't they use 2 sacs up there know?

i dont know, thats my question i hve th walkthrough, but i want to put under seats so i dont have to jump over the bag all the time

[da.bell]

Well, Timmy! and Matt (Administrator) both have RZ2's and I know Matt's has ballast but I think his is factory.... I am not sure I have seen anyone on here with an RZ2 with the integrated fat sac...

I would call fly high and ask them the exact measurements. Then measure...

[Matt Garcia]

dc, do you have the factory ballast on your RZ2?

I have the stock ballast and run additional sacs on top of it. For the front bag its a Pro X Series Integrated Bow Sac - W711. I am not sure if the Enzo sack will fit.

I am thinking about somehow integrating my stock ballast and soft sacs with the existing ballast pumps. Not sure yet on what that best route is though.

[Timmy!]

I run last years model of V-drive sacs (2) 550lbs sacs in either locker (depending on which side we are surfing on). I plan on getting the integrated bow sac for next year and possibly the Enzo sac or a custom one made similar to it.

here's the "dark" side wave with 900~1,000 lbs in the locker.

[dcsnowwake]

currently i run 2 v drive sacs 400 lbs and a walkthrough sac 650lbs.

no stock ballast at all.
just trying to get ideas for what to do as i want more ballast for surfing when i dont have 12 people on my boat

[dogbert]

Nice job on that wake Timmy!

[Timmy!]

Nice job on that wake Timmy!

Thanks! That's 12.0 mph and taps at 3.5 with the weight mentioned above.

[talltigeguy]

The first thing I would do when I get a new boat is move the batteries that are in the port side storage compartment and put them under the glove box. I think they are in the dumbest location ever. (That is on boats that come with the Tige factory ballast)

I think the ENZO sack is too big for the storage compartment. The tall portion of the bag is probably too long , but since it is soft, it really may not matter much.

[xpjim1]

I think the ENZO sack is too big for the storage compartment. The tall portion of the bag is probably too long , but since it is soft, it really may not matter much.

Until it finds that extra long bolt

[Timmy!]

While cleaning my boat tonight I found out that you can't run the integrated bow sac in an RZ2, it has boards that close off the front section to the side sections Looks like you'll have to run 2 sacs, 1 in each side.

[third timer]

gettin started

I just got my boat a month ago and I'm gettin ready to install pumps and sacs in the rear comps. I found 18x20x32 sacs that claim about 425 each. they look to fit in real nice. Any tips on installing pumps would be welcome.

[third timer]

surfin

That's the best surfin wake I've ever laid my eyes on. (I ain't been out much though).