Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Belt dust

  1. #16
    Join Date
    May 2014
    Posts
    6
    Boat
    2000 21v RIDERS EDITION
    I have the same boat and motor set up. I second the blower hose fix, but also the idler pulleys are notorious for causing issues with the belt. I change the belt and pulley every 2 seasons. You can usually tell it’s time by a loud screeching sound under load.


    Sent from my iPhone using Tapatalk

  2. #17
    Join Date
    Jul 2017
    Location
    Northport, AL
    Posts
    107
    Boat
    2000 2100V Limited
    The idler pully? The pully that is used to tighten the belt? If so, where do you get it and do you have apart number


    Sent from my iPhone using Tapatalk

  3. #18
    Join Date
    May 2014
    Posts
    6
    Boat
    2000 21v RIDERS EDITION
    When I buy parts for mine it’s always a cross reference with 99 Chevy 5.7 P/U w/o AC. It’s located on the top right of your motor if you are facing the transom. That’s for a MAG MPI


    Sent from my iPhone using Tapatalk

  4. #19
    Join Date
    Mar 2004
    Location
    San Clemente, CA
    Age
    53
    Posts
    3,999
    Boat
    1997 2150
    If you are looking for Merc part #s, you can enter your engine serial # on this site and go through the correct diagrams.
    https://www.perfprotech.com/mercury-...-parts-catalog
    Mike Allen, Tigé owner since 1997

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •