Results 1 to 6 of 6

Thread: 2000 slm comp - Bilge Pump Location

  1. #1
    Join Date
    Oct 2018
    Location
    AB
    Posts
    8
    Boat
    1995 2000slm comp

    2000 slm comp - Bilge Pump Location

    Wondering if anyone knows where the stock location for the bilge pump is in a 1995 2000 slm comp?

    Picture attached shows mine at present... seems high in the bilge, wondering if maybe a prior owner moved it to accommodate the slope that the boat sat on when in the hoist? Access lower in the bilge by the drain plug (at the front of the engine cover) is not great, may have also played a part in relocating assuming this is not the stock mounting point?

    Thanks in advance for any insight!




    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Oct 2018
    Location
    AB
    Posts
    8
    Boat
    1995 2000slm comp
    A side note, nothing to do with the bilge pump, but maybe a fellow ‘95 2000 slm comp owner might be able to also answer while looking at this post...

    I cannot locate a capacity tag anywhere on this boat. Did Tige have these boats tagged, and if so, where is it hiding?


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Jun 2005
    Location
    NorNev
    Age
    45
    Posts
    6,326
    Boat
    '00 22i Custom Fox Edition
    You can place a bilge pump wherever you want. I can’t imagine that’s the stock location. Mine is under the oil pan.

    My capacity sticker is on my ski pylon.
    You'll get your chance, smart guy.

  4. #4
    Join Date
    Oct 2018
    Location
    AB
    Posts
    8
    Boat
    1995 2000slm comp
    Thanks!




    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Mar 2004
    Location
    San Clemente, CA
    Age
    53
    Posts
    3,996
    Boat
    1997 2150
    I doubt there is a capacity tag. I don't think they were/are required until it's a certain length. My 97 doesn't have one.
    That bilge is immaculately clean. Amazing. Lets see the rest of that OG.
    I would think the lowest point and best location for the bilge pump is near the drain plug in the center.

    Are you getting pulled on ski behind that?
    Mike Allen, Tigé owner since 1997

  6. #6
    Join Date
    Oct 2018
    Location
    AB
    Posts
    8
    Boat
    1995 2000slm comp

    2000 slm comp - Bilge Pump Location

    Thank you!

    The pump is headed forward. I’m considering an aftermarket round floor hatch to install forward of the pylon to make it accessible for testing and maintenance.

    No tag to be seen in mine either, figured I’d check with the community to make sure it hadn’t gone MIA over the years.

    The boat was in great shape when we bought it last fall. The bilge was not this clean at purchase, but pretty close . We’ve reupholstered the seat bases (split seams at piping) and replaced the original branding with current raised graphics over the winter. Otherwise appears mostly original as far as I can tell.

    No great on-water pics yet, but here’s a couple from the garage:





    Last edited by Pypes; 04-29-2019 at 09:51 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •