Page 1 of 5 12345 LastLast
Results 1 to 15 of 74

Thread: Go Surf Assist on RZ2

  1. #1
    Join Date
    Mar 2019
    Location
    Henderson NV
    Posts
    9
    Boat
    2010 RZ2

    Go Surf Assist on RZ2

    Hi, I have searched quite a bit, and cannot find anything on the outcome of installing GSA on an RZ2. Is there anyone that can give me a review on the setup with the RZ2? I have a very well taken care of 2010 and would like put a nice automated system on it. The guys at GSA said they have completed over 50 on the RZ2s, so hoping at least a few of you are on here. I would also be interested to hear if any of you have put a different automated system on that have had great outcomes.

    Thank you in advance for any information that would help me take the plunge.

  2. #2
    GSA is the best aftermarket setup you can buy. No doubt about it.
    It's dangerous to go alone! Take this.

  3. #3
    Join Date
    Nov 2013
    Location
    Yakima, WA
    Age
    49
    Posts
    148
    Boat
    ZX5
    I put one on a Z1 I had. Pretty simple and worked flawlessly.

  4. #4
    Join Date
    Mar 2019
    Location
    Henderson NV
    Posts
    9
    Boat
    2010 RZ2
    Thanks for the replies! Cek1, how did the GSA compare to your RZX2 system? I have not gotten to ride behind the RZX2, but they look amazing. I need to do my best with the RZ2 until I can step up!

  5. #5
    Join Date
    Mar 2019
    Location
    Henderson NV
    Posts
    9
    Boat
    2010 RZ2
    Quote Originally Posted by KoolAid View Post
    GSA is the best aftermarket setup you can buy. No doubt about it.

    This seems to be the common feeling about the GSA. I am more than likely buying it, but I just wanted see a review or two of a RZ2 in action with it. I am probably just being a little paranoid that it may just be a 4k marginal improvement that I could have lived without until I can upgrade.

  6. #6
    Join Date
    Jul 2015
    Location
    Orange County
    Posts
    1,767
    Boat
    2019 ZX5/ZX1
    Quote Originally Posted by toogrady1979 View Post
    This seems to be the common feeling about the GSA. I am more than likely buying it, but I just wanted see a review or two of a RZ2 in action with it. I am probably just being a little paranoid that it may just be a 4k marginal improvement that I could have lived without until I can upgrade.
    I can save you some cheddar

    714-306-3999 rings me direct.

    -Jason

  7. #7
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,801
    Boat
    Back in the good ol' days a 2006 22ve
    how did the GSA compare to your RZX2 system?
    I think this is a hard comparison. One is an OEM system tested on their hulls. Actuator travel and plate size and shape, the other is an aftermarket universal plate system. Does not even touch on the fact that the RZ2 and RZX2 hulls are worlds apart.

    But hay, good or bad for your boat, at least someone here can make you a deal on it.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  8. #8
    Join Date
    Oct 2014
    Location
    Great Faces, Great Places--South Dakota!
    Posts
    1,230
    Boat
    Used to have gangsta lean 24Ve; then GSA F24 Tomcat, now a 2016 Supra SE450. Onward we roll!
    Good gravy Mike, are we doing this again?


    Sent from my iPhone using Tapatalk
    Time flies like an arrow; fruit flies like bananas!

  9. #9
    Join Date
    Jul 2015
    Location
    Orange County
    Posts
    1,767
    Boat
    2019 ZX5/ZX1

    Go Surf Assist on RZ2

    Quote Originally Posted by chpthril View Post
    I think this is a hard comparison. One is an OEM system tested on their hulls. Actuator travel and plate size and shape, the other is an aftermarket universal plate system. Does not even touch on the fact that the RZ2 and RZX2 hulls are worlds apart.

    But hay, good or bad for your boat, at least someone here can make you a deal on it.
    I’ve been on my best behavior with with you for the last time.

    If I were you I would steer clear of me and surf systems you are way out matched. You could spend every day the rest of your life installing surf Systems and or out using them and still not be worthy of toweling me off after a session.

    I have put Gsa on even the most stubborn of hulls such as the asr and made it an absolute beast. I have had it on rzx, zx, rzrs and almost everything in between. I have done the same with taps 3.

    He had input from others that was spot on including info from Tige direct. Why would I need to ramble on? Unlike you, I don’t need to sound off to feel important.

    He made a comment about making a 4K gamble. Given this is my realm, I offered to help him if he so desired since no one else did.

    Stop acting like a tool, you are better then that and with all you do the industry needs you better then that.

    To the OP. Below is a photo of an rz4 with Gsa. Again, no reason to burn 4K. If you want to save some money i can help there. If not fine too.






    Sent from my iPhone using Tapatalk
    Last edited by elevatedconcept; 04-17-2019 at 02:43 AM.

  10. #10
    Join Date
    Jul 2015
    Location
    Orange County
    Posts
    1,767
    Boat
    2019 ZX5/ZX1

    Go Surf Assist on RZ2

    To the OP.

    If you would like to chat with me about anything to do with the system, I am available day or night. My cell can be found on here.

    Koolaid can vouch for my knowledge in this area since that seems to be in question here.


    Sent from my iPhone using Tapatalk

  11. #11
    Join Date
    Nov 2013
    Location
    Yakima, WA
    Age
    49
    Posts
    148
    Boat
    ZX5
    These are a couple of my Z1 with GSA.
    Attached Images Attached Images

  12. #12
    Join Date
    Nov 2017
    Location
    Dunstable, MA
    Posts
    36
    Boat
    2018 RZX3
    I installed the GSA on my Old 2009 Supra 21V Launch. It made a 100% difference in the suability of the boat. The install took me about 8 hours. The person down at GSA was awesome (Ryan), he walked me through it. If I had another boat with out a surf system, I would do it again. The hardest part of the install is figuring out the first plate and then drilling the holes in the boat. Drilling the oles is easy, its just deciding do I really want to drill holes below the water line! I had at least two shops in my area say they could not do it. My advice is to do it yourself, just take your time, lay everything out, and do it.

  13. #13
    Join Date
    Oct 2012
    Location
    Jacksonville, FL
    Posts
    322
    Boat
    2012 RZR
    I don't comment much. Come here to the site to see everyone's new boats, mods, upgrades etc. but damn elevated settle down Beavis. You seem like a d-bag in your reply to Chpthrl.

  14. #14
    Join Date
    Mar 2019
    Location
    Henderson NV
    Posts
    9
    Boat
    2010 RZ2
    Thank you again for taking the time last night to talk! I have seen what i needed, and got my reassurance. I will be calling back today!
    Quote Originally Posted by elevatedconcept View Post
    To the OP.

    If you would like to chat with me about anything to do with the system, I am available day or night. My cell can be found on here.

    Koolaid can vouch for my knowledge in this area since that seems to be in question here.


    Sent from my iPhone using Tapatalk

  15. #15
    Join Date
    Oct 2014
    Location
    Great Faces, Great Places--South Dakota!
    Posts
    1,230
    Boat
    Used to have gangsta lean 24Ve; then GSA F24 Tomcat, now a 2016 Supra SE450. Onward we roll!
    Quote Originally Posted by whiteflash watersports View Post
    I don't comment much. Come here to the site to see everyone's new boats, mods, upgrades etc. but damn elevated settle down Beavis. You seem like a d-bag in your reply to Chpthrl.
    I would say this, GSA is a wonderful system. It trumps TAPS 3. I would disagree with any suggestion that it is an “unknown” and second to a factory set up.


    Sent from my iPhone using Tapatalk
    Time flies like an arrow; fruit flies like bananas!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •