Results 1 to 2 of 2

Thread: Raptor 400 Idler pulley

  1. Raptor 400 Idler pulley

    Does anyone have a part number for the two on this engine? One of my bearings is going out. Thanks guys for any info.

    Sent from my SM-G970U using Tapatalk

  2. #2
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    1,643
    Quote Originally Posted by josh.lewis.338211 View Post
    Does anyone have a part number for the two on this engine? One of my bearings is going out. Thanks guys for any info.

    Sent from my SM-G970U using Tapatalk
    Do you need the grooved pulleys or the flat one that rides on the backside of the belt?? Both?? What year is your boat(wondering because early Raptors had an extra pulley).
    Have had a few boats that I change out to a gatorback belt to quiet belt noise down(pulley ever so slightly misaligned).
    I can easily get you Indmar part numbers but havent bothered cross shopping pulleys from a cheaper automotive source yet. I do have a PN for the tensioner that is automotive so saves a bunch of $

    https://m.harborfreight.com/serpenti....google.com%2F
    ^^these guys make belt work a lot easier and are cheap. For guys with the big square heat exchanger they are pretty much a must.
    Attached Images Attached Images
    Last edited by freeheel4life; Yesterday at 11:04 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •