Results 1 to 4 of 4

Thread: How to remove vertical cushions to install tower? 2001 2100v

  1. #1

    How to remove vertical cushions to install tower? 2001 2100v

    Installing a monster tower this winter. How do the cushions attached to the sides of the boat come off?

  2. #2
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,573
    Boat
    Back in the good ol' days a 2006 22ve
    They are likely held on by one of two ways. Studs with fender washers and 7/16 nuts that you have to stretch armstrong to reach or there are small screws hidden between the color change in vinyl. Say you have a white panel and gray panel, feel in between the two panels for screws.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  3. #3
    Quote Originally Posted by chpthril View Post
    They are likely held on by one of two ways. Studs with fender washers and 7/16 nuts that you have to stretch armstrong to reach or there are small screws hidden between the color change in vinyl. Say you have a white panel and gray panel, feel in between the two panels for screws.
    Thank you!!! I'll try that!

  4. #4
    Join Date
    Sep 2014
    Posts
    11
    Boat
    2000 2100v Limited
    Quote Originally Posted by chpthril View Post
    They are likely held on by one of two ways. Studs with fender washers and 7/16 nuts that you have to stretch armstrong to reach or there are small screws hidden between the color change in vinyl. Say you have a white panel and gray panel, feel in between the two panels for screws.
    I have a 2000 2100v and assume it’s probably going to be the same. The seats on the port and starboard were screwed on with wood screws (between the cushions). The curved ones at the stern were also screwed in with stainless from the ski lockers.

    Was not easy getting them out though, the wood screws were all rusted and half of them stripped/ broke off completely. Had to put a wedge between the seats and fiberglass and cut the screws with a duck tapped hacksaw blade.

    Good luck!


    Sent from my iPhone using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •