Results 1 to 9 of 9

Thread: speed control conversion 2006 Tige 20I

  1. Question speed control conversion 2006 Tige 20I

    Looking to upgrade my speed control on my 2006 Tige 20I and having a great deal of difficulty finding a product that will work with the marine power ecm.
    Has anyone had any luck doing this
    thanks
    Rod
    Canada

  2. #2
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,573
    Boat
    Back in the good ol' days a 2006 22ve
    Im guessing your MP is drive by wire? If so, there not a system I know of. One owner made a conversion of some type, that gave the speed control actuator a control lever to push/pull on back in the engine bay. Was documented here.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  3. perfect pass has a dbw stargazer wake edition for a marine power 5.7.i have installed in a 2006 24v that works great

  4. #4
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,573
    Boat
    Back in the good ol' days a 2006 22ve
    Bruce,

    Perfect pass rep stated they will not support that 06 DBW MEFI, so it may work, but glitchie. Whats the part number?

    Is your MP engine silver or charcoal? Odd for a V to have the Charcoal DBW engine as most finished out the model year using the older silver cable driven.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  5. Module #DBW04089 gps upgrade,gage included. My MP engine is charcoal.

  6. #6
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,573
    Boat
    Back in the good ol' days a 2006 22ve
    Mark from Perfect pass:

    Hey guys,

    Marine Power uses a MEPHI-4 ECM. This is the same ECM that is used on most MasterCraft boats from 2005. Perfectpass is compatible with the MEPHI-4 ECM and have no problems controlling a 2005 MasterCraft boats.

    The Marine Power engines, for some odd reason, do not work well with cruise control system. These odd problems were never solved by Marine Power. As a result, Perfectpass decided that supporting these engine was not worth it due to performance issues.
    http://www.tigeowners.com/forum/show...+drive+by+wire

    A charcoal MP would most likely be a DBW
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  7. Spoke with Mark and ordered system on 10/31/17. Had Norris marine install. Had problems with boat going into limp mode. Norris could not figure out problem or did not care to. After research online, I corrected problem by re calibrating throttle position sensor. Has worked ever since.

  8. #8
    Quote Originally Posted by Bruce3 View Post
    Spoke with Mark and ordered system on 10/31/17. Had Norris marine install. Had problems with boat going into limp mode. Norris could not figure out problem or did not care to. After research online, I corrected problem by re calibrating throttle position sensor. Has worked ever since.
    Lets go back a bit. Did your boat have the old style perfect pass or did it have Tige's cruise control? There was an ECM flash that ran PP on that year model. It was very rare and I do not think they got it completely dialed in.
    It's dangerous to go alone! Take this.

  9. it had perfect pass.The gauge quit working and was not availible any more so i had to upgrade to gps stargazer .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •