Results 1 to 7 of 7

Thread: 2008 22ve Automating Ballast

  1. #1

    2008 22ve Automating Ballast

    We added a couple rear locker and a front bow fly high sacs this past summer. Now looking at options for automating. Any good posts to review that might walk me through the design and finished project. Thanks in advance.

    Sent from my SM-G950W using Tapatalk

  2. #2
    Join Date
    Apr 2006
    Location
    Lake Wylie area, NC
    Age
    50
    Posts
    27,573
    Boat
    Back in the good ol' days a 2006 22ve
    Theres 2-3 members here at least, that have documented their installation of our custom ballast system.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

  3. #3
    Thanks I seem to recall reading some of the details when we were just thinking about adding the sacs but can't seem to find the posts now.

    Sent from my SM-G950W using Tapatalk

  4. #4
    Join Date
    Jun 2013
    Location
    Langley, b.c.
    Posts
    480
    Boat
    2010 Tige 22ve
    U can search my posts I did the rears. Parts from mla

  5. #5
    Join Date
    Mar 2011
    Location
    Bothell, WA
    Posts
    2,771
    Boat
    22Ve 2008
    First - MLA is the man. He has the stuff and can really provide the detailed support for any issues.

    Here is my thread on my ballast project
    http://www.tigeowners.com/forum/show...722&highlight=

    I have a 2008 22Ve and I added MLA custom rear sacs and automated with rule 1100 GPH aerator pumps. If you do not have the factory ballast you will have a simplier project. No need to relocate batteries, blower and taps pump. No need to build new compartment walls - but you should definitely reinforce them. So here is the quick outline
    1 - choose Aerator or impeller pumps - I went with aerator - 2 per sac vs. 1 impeller, cost is close, more plumbing with aerator, Aerator fills and drains slightly faster
    2 - Fill pumps are mounted to dedicated through hull fittings with bronze ball valves in the bilge - space it tight, make sure your ball valve handle has space to open and cloase, pumps and hose routing to avoit places to trap air (constant slope). I have has no issues with pump priming.
    3 - Drain pumps mount in the drain line as close to the sac as possible - I connected the drain line to the vent line with a "T" fitting and a check valve and ran the vent/drain line out to the opposite side of the boat to keep that opening above the height of the water in the full sac - prevents passive draining
    4 - Created a new power circuit in the power panel / breaker box under the helm to power the pumps. It required diodes attached in the back of the switches to make the lights function - Skippabcool has a great ballast thread with the details on wiring the switrches.
    http://www.tigeowners.com/forum/show...hlight=ballast



    I have been very happy with my system and the boat makes a great surf wave.

  6. #6
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    819
    Boat
    2007 22ve
    Here’s a link to my build out on my 2007 22VE. I chose to use reversible pumps instead of aerators.

    http://www.tigeowners.com/forum/show...-Ballast-build

  7. #7
    Thanks kindly guys will definately give them a read.

    Sent from my SM-G950W using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •