Results 1 to 5 of 5

Thread: Software Help

  1. #1
    Join Date
    Aug 2015
    Location
    Lewisville, TX
    Posts
    103
    Boat
    Tige 2015 Z3

    Software Help

    I installed a new touch screen and I’m having trouble updating the software.

    The new screen will not operate my stereo. The AVX screen is different. This is the picture of the software from the old screen

    D0C43FDC-2048-46A4-836D-7C30DAD4E25E.jpg


    This is the current software on the new screen

    CA516DCA-AE43-4033-9734-23E48821A250.jpg

    This is the file that is supposed to upload from my thumb drive

    218B0136-243F-452B-9B69-6BA52DC9B37E.jpg

    Any ideas or help? I’m trying to keep the boat on the water the last few weeks of this season.

    Thanks,

    Billy

  2. #2
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    1,478
    The screens for 16 and down were different and had a different software version for the Polk that in the glovebox. Not sure you have the final update version that was for the 16 and down screens.If you had the software for 17 and up that have the ICE module that would explain it. OR if you got sent a MY17+ screen Im not sure if it will work on a 15 or not... Justin @ Tige would be the guy to answer for sure in regards to software version.

  3. #3
    Join Date
    Feb 2008
    Location
    Dayton Ohio
    Posts
    523
    Boat
    16 Z1, 12 RZR, 08 Z1
    Good luck as I will be following your success. I will be doing the same.
    Nick
    Dayton, Ohio

  4. #4
    Join Date
    Dec 2005
    Location
    Stuttgart Germany
    Posts
    893
    Boat
    Boat free till 2021 2016 Z3, 1998 2200v
    Try a different thumb drive. I had the same problem. Can’t remember exactly how I solved it but I think that some thumb drives don’t work. You update is the same I used so it should work. Do you have the dealer code?

  5. #5
    Join Date
    Dec 2005
    Location
    Stuttgart Germany
    Posts
    893
    Boat
    Boat free till 2021 2016 Z3, 1998 2200v
    Seems like a fix someone did was to use a PC rather than s Mac to upload into the thumb drive. Pretty sure I formatted the drive first as well. Something about a FAT 32 file structure.

    In any case your close. I can’t remember exactly what I did, but I solved it with a couple emails to Justin and some searching online. Wish I had written it up when it was fresh

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •