Results 1 to 7 of 7

Thread: 2018 Rzx3 surf setup

  1. 2018 Rzx3 surf setup

    I traded in my Centurion sv244 2012 for a new 2018 Rzx3. I am a newbie to this site! I used to get a lot of good info from the Centurion owners site!

    This has probably been discussed on this forum but this is my first post so I thought that I would ask for recommendation on your surf setup for both regular and goofy.

    Thanks

  2. #2
    Join Date
    Sep 2017
    Location
    Minneapolis, MN
    Posts
    180
    Boat
    2019 RZ2
    Welcome to the forums. There is a lengthy thread on settings. Elevatedconcepts has the RZX dialed in and he can provide excellent info.

    http://www.tigeowners.com/forum/show...ht=RZX+ballast

  3. #3
    Join Date
    May 2014
    Location
    Vancouver Island, BC, Canada
    Posts
    1,213
    Boat
    2016 RZX3, 2014 R20 with taps 3
    I find the rzx really needs some lead in the bow if you run with pnp. It totally makes performance all around overall just better. I find having about 200 in the surf locker surf side really helps too. If you don’t have the lead dump the REAR offside down to 80.
    With these settings start with surf at 4 and taps at 4 and go from there making small adjustments at a time.

  4. #4
    Join Date
    Jul 2015
    Location
    Orange County
    Posts
    1,691
    Boat
    2019 ZX5/ZX1
    ^what he said.

  5. #5
    I don’t have PnP, so maybe I’m just in a different position, but I’ve been running 200 lead all the way up in the bow, full factory ballast, and 500 lead, rider side in my surf locker. It gets my lean and rise pretty close to Elevated’s suggested numbers in the above link.

    I’ve contemplated moving some of that lead to the side storage, but don’t think I’ll get enough lean and rise without having that 500 in the ***..


    Sent from my iPhone using Tapatalk Pro

  6. #6
    Join Date
    Nov 2017
    Location
    Dunstable, MA
    Posts
    31
    Boat
    2018 RZX3
    I have a 2018 RZX 3. Mine is pretty consistent with the following, I have the 560 PNP bags:
    Bow completely full
    Surf side regular 100 % full
    Goofy Surf Side usually run about 80%. I always fill to 100% and then dump ballast to get to 80% depending on my people load. Taps numbers are the same Taps 3 at 4 taps 1 at 4 or sometimes 5. Speed anywhere from 11.5 to 12. I prefer 12 as the lip seems firmer. Wave is prep long, with a nice curl and a good face. It you need to knock down the height just drive the Taps 1 plate down.

  7. #7
    Join Date
    Oct 2014
    Location
    Houston, Texas
    Age
    32
    Posts
    170
    Boat
    '17 RZX 3; '15 Z3 w/AVX
    Quote Originally Posted by jakelegg21 View Post
    I traded in my Centurion sv244 2012 for a new 2018 Rzx3. I am a newbie to this site! I used to get a lot of good info from the Centurion owners site!

    This has probably been discussed on this forum but this is my first post so I thought that I would ask for recommendation on your surf setup for both regular and goofy.

    Thanks
    Welcome and congrats on the new steed! I believe you bought that rad looking white and vivid black RZX3 from Texas Tige. Congrats!


    Knowing what PNP bags are in the rear, if any, would be a big help on letting us help you dial it in. I am a Houstonian and keep my RZX3 up on the Trinity. Id be glad to get out on the water with you and show you the ins and outs of the new boat.

    You will find the Tige Owners site very valuable and lots of great owners on here. If I don't catch you on the water before the reunion, I hope to meet you there.

    Cheers!
    -Brandon Lucas
    Houston, Tx

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •