Results 1 to 4 of 4

Thread: 2001 RZ2 TRAILER SPECS

  1. 2001 RZ2 TRAILER SPECS

    Hey all, I just purchased a 2011 RZ2 however it came on a 2016 Supra Boatmate Trailer. I found a guy that can weld in Austin area and has worked on trailers in the past, however we cannot find specs for the boat anywhere. Boatmate was no help at all because they use a standard template and also said they would be liable if they offered any suggestions on changing the trailer. (Really they just want me to buy a new one).

    Does anyone own a tige trailer that could provide measurements on board placement/height, length?

    Thanks,

    Brian

  2. #2
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    724
    Boat
    2007 22ve
    My buddy has a 15 RZ2 on a boatmate trailer. I could take some measurements for ya. What specifically do you need?

  3. #3
    Join Date
    Aug 2015
    Location
    Salt Lake City, Utah
    Posts
    1,067
    Boat
    2017 RZX3, 2013 MB F24, 2000 21V
    If the boat is sitting on the trailer now, you should have all the information you need right there to make any needed adjustments.

    I did a similar job for a boat on a trailer. Used a couple of floor jacks and wood blocks to take the weight off the bunks. Then cut the bunks off the trailer (one bunk at a time), repositioned them and welded back in place after doing some cleanup. Not a bad job.

  4. Unstuck, I think we will take that approach. The bunks aren't on the flat spots of the boat anyway so we could really just weld new ones in the spot we want them.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •