Results 1 to 5 of 5

Thread: UFP DB-42 replacing with DB-35

  1. #1
    Join Date
    May 2017
    Location
    Northern California
    Posts
    36
    Boat
    2003 v22

    UFP DB-42 replacing with DB-35

    I have a trailer with UFP DB-42 setup and I was wondering if the DB-35 kit can be used as a direct (little modification) replacement

  2. #2
    Join Date
    May 2014
    Location
    Sahuarita, AZ
    Posts
    196
    Boat
    2002 21V
    I have used Pacific Trailer for all my trailer parts needs. I just did brakes last summer and ordered my calipers through them and did my master cylinder a while back too. They can answer all those questions for sure.

  3. #3
    Join Date
    May 2017
    Location
    Northern California
    Posts
    36
    Boat
    2003 v22
    Thanks jimidemo

    Pacific trailer rep was helpful and I was able to confirm that the DB-35 will be a direct replacement.... just waiting now....

  4. #4
    Join Date
    May 2017
    Location
    Northern California
    Posts
    36
    Boat
    2003 v22
    Thought I would show up the pics as its almost done

    Old DB-42's well used
    20180408_133102.jpg
    New DB-35 setup
    20180408_133104.jpg
    Finished with install need to purge the brake lines
    20180421_095121.jpg
    20180421_095136.jpg

  5. #5
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    1,520
    NICE!! When it comes time to bleed if you have a buddy lay under actuator you can get in there with a flathead or prybar and manually stroke the master cylinder instead of pushing and pulling while hooked up to the truck.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •