Page 3 of 5 FirstFirst 12345 LastLast
Results 31 to 45 of 69

Thread: I switched brands and ordered my first Tige!!!

  1. #31
    Join Date
    Jan 2018
    Location
    Kansas City
    Posts
    37
    Boat
    2018 RZR
    Awesome! Thanks so much for everyones input. I'm getting the over the tower cover and Zcline seat after reading what everyone has said.

  2. #32
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    962
    Quote Originally Posted by tgmind View Post
    Awesome! Thanks so much for everyones input. I'm getting the over the tower cover and Zcline seat after reading what everyone has said.
    Congrats. You will love it. Take time with your dealer on delivery and figure out bimini position and tower folding procedure. Be sure to show us some pics.

  3. I have a Z1 with a regular cover so not so familiar with the ins and outs of the cover all. However, one issue with the regular cover is that water can sometimes pool just under the tower. I've had to make a bunch of adjustments (beyond playing with the rope tension on the pulley) to correct this, but it wasn't as straightforward as you may think. Also, as much as you try, there are gaps between the cover and the tower base that allow some water in the boat on a stormy day while on the lift. I would seriously consider the coverall.

  4. #34
    Join Date
    Feb 2018
    Location
    Edmonton Alberta Canada
    Posts
    13
    Boat
    2018 Tigé RZR
    Hey everyone I just switched to Tigé as well! I had a small starter boat (2015 Scarab HO Impulse) and I just order a new 18 RZR this week. Pumped! Being in Canada I figured heated seats was a no brainer but I didn't order a heater. I was told by my dealer that there was no cover all cover for this boat and just the mooring cover was available? After reading this I'm hoping this isn't true and will be calling them.

    Ordered it in Graphite and Stone accents, frost and mocha interior. Two custom colour Rev-10 tower speakers with LED rings.

  5. #35
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    677
    Boat
    2007 22ve
    Quote Originally Posted by Harvard View Post
    Hey everyone I just switched to Tigé as well! I had a small starter boat (2015 Scarab HO Impulse) and I just order a new 18 RZR this week. Pumped! Being in Canada I figured heated seats was a no brainer but I didn't order a heater. I was told by my dealer that there was no cover all cover for this boat and just the mooring cover was available? After reading this I'm hoping this isn't true and will be calling them.

    Ordered it in Graphite and Stone accents, frost and mocha interior. Two custom colour Rev-10 tower speakers with LED rings.
    You’re gonna wish you had that heater! Congrats on the new boat and welcome to the Tige’ family! Post pics when you can.

  6. #36
    Join Date
    May 2014
    Location
    Vancouver Island, BC, Canada
    Posts
    991
    Boat
    2016 RZX3, 2014 R20 with taps 3
    I thought the cover all was only rzx series. After going a couple seasons with no heater there’s no way I’m going back... especially with our Canadian seasons.

  7. #37
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    962
    The nice part is heater is pretty easy to add after the fact, and then customizable as well. I've done some with 3 pullout instead of 2. Done one pull out and two fixed at helm for captain. Have also added a whole second heater on a z3 and had the pullout on the side of the trashcan pillar.

  8. #38
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    677
    Boat
    2007 22ve
    Quote Originally Posted by freeheel4life View Post
    The nice part is heater is pretty easy to add after the fact, and then customizable as well. I've done some with 3 pullout instead of 2. Done one pull out and two fixed at helm for captain. Have also added a whole second heater on a z3 and had the pullout on the side of the trashcan pillar.
    Freeheel, What kind of heater would you recommend for aftermarket? I’d be happy with a two outlet, one for me and the other for my toes

  9. #39
    Join Date
    May 2014
    Location
    Vancouver Island, BC, Canada
    Posts
    991
    Boat
    2016 RZX3, 2014 R20 with taps 3
    Quote Originally Posted by Jetdriver View Post
    Freeheel, What kind of heater would you recommend for aftermarket? I’d be happy with a two outlet, one for me and the other for my toes
    For the price I’ve heard good things about skim dims heater craft knock off.
    http://www.skidim.com/mobile/ACU-HEA...o/203%2DH%2DC/

  10. #40
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    677
    Boat
    2007 22ve
    Thx, I’ll check it out. I’ve heard heater craft but wasn’t sure of the other options that were reputable,

  11. #41
    Join Date
    May 2014
    Location
    Calgary, Canada
    Posts
    122
    Boat
    '13 Tige Z1 - Sold '08 Tige Z1
    The best part about having a shower, is washing the boat floor and seadek after a full day. Washing the sand and junk off the floors(and our kids on the platform). We have a long hose added on ours and we use our shower all the time.

  12. #42
    Join Date
    Jan 2004
    Location
    Mount Juliet, TN
    Posts
    2,507
    Boat
    Tigé

  13. #43
    Join Date
    Feb 2016
    Location
    Boise, ID
    Posts
    962
    I've only ever installed Heatercraft kits. My only complaint with heatercraft is there always seems like big gap between order and shipping and arrival. Not sure where the hang up is. I just know that when I order I never expect it quick.

  14. #44
    Join Date
    Dec 2015
    Location
    Denver, CO
    Posts
    677
    Boat
    2007 22ve
    Thx guys, I’m gonna pull the trigger on a heater and install it this winter. Just gotta figure out which is the best bang for my buck.

  15. #45
    Join Date
    May 2014
    Location
    Vancouver Island, BC, Canada
    Posts
    991
    Boat
    2016 RZX3, 2014 R20 with taps 3
    If you’re gonna order heater craft I’ve had great customer service through wakemakers with returns and questions..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •