Direct Drive Engine Pcitures need quick!!!

[wannabewakeboarder]

Help, Someone find me a couple of Direct drive engine picture quick, I can't find any for a Power Point presentation at school! All I found is a couple of dingy old MC pictures :(

Help! please and thanks,
Michael....

[da.bell]

http://www.tigeowners.com/forum/showthread.php?t=8024

[wannabewakeboarder]

Da, I need an actual picture of the engine in a DD.

Thanks though.

[yllw20]

why did u wait till last minute. should have started earlier.

[jwanck11]

that was just wrong phil.


pot-stirrer. :D


Sorry bud... boat is 45 miles away.

[philwsailz]

http://www.oldmarineengine.com/history/Stuart/stuart_turner_p55.jpg

[philwsailz]

http://www.plumcreekmarketing.com/07science/01images/fullsize/164302.jpg

[Fit to be Tige]

http://www.plumcreekmarketing.com/07science/01images/fullsize/164302.jpg

Now this one I like. Simple and to the point.

[philwsailz]

http://www.yachtsnet.co.uk/archives/sadler-26/sadler-26-engine.jpg

[gman]

http://rds.yahoo.com/_ylt=A0S0202bpLVIYC4AzQ2jzbkF/SIG=1270mp4id/EXP=1219950107/**http%3A//www.glen-l.com/inboard-hdw/direct-drive.html

[philwsailz]

http://www.glen-l.com/picboards/picboard9/pic483f6.jpg

[gman]

hope the drawing helped and I got it to you in time for your presentation.

[philwsailz]

did we get you covered Michael?

[Jason B]

Man I CAN'T STAND IT when my daughter pulls that crap!!! "Daddy, I have a project due tommorow and I need....." Makes me nuts!!!! Last time I let her fail, lets see if she learned her lesson.

[dogbert]

Last time I let her fail, lets see if she learned her lesson.

That will depend on how well she's got you wrapped around her finger ;)

[dogbert]

There's an old saying I use in my line of business:

"Poor planning on your part does not constitute an emergency on my part."

Also, somewhat relevant:

"Please solve your problems in advance so I can help you more."

:D

[wannabewakeboarder]

why did u wait till last minute. should have started earlier.

I have until tomorrow now, I didn't wait until the last min, It was a qucik project on power point started yesterday, and due today, well the teacher realized that he didn't allow enough time for us. So we have until tomorrow. haha

I'm hitting the river now, later....

BTW we do this project in class, I would be going out on the boat with the project wasen't done;)

[Jason B]

That will depend on how well she's got you wrapped around her finger ;)

Oh, I'll admit I'm wound tight. Helping her last minute though becomes a bad habit she needs to learn to change. I hated to do it, but she had to learn now in elementary before her work REALLY matters in HS or college.

[philwsailz]

BTW we do this project in class, I would be going out on the boat with the project wasen't done;)

:confused: ??????????????????????:confused:

[philwsailz]

http://sci-toys.com/scitoys/scitoys/thermo/big_flame_boat.jpg

[jwanck11]

Wow phil... some really and I mean REALLY cool chit you've posted!!! :ro:

[zad0030]

Here you go
http://i287.photobucket.com/albums/ll146/zad030/Picture1698.jpg

[da.bell]

:confused: ??????????????????????:confused:

The #1 reason why he is still in school. :D

[jwanck11]

Wow Zad... that one looks really weak and meager!

What kind of boat is that in?? :D :D :D

[jwanck11]

The #1 reason why he is still in school. :D

LOL :ro:

[zad0030]

Wow Zad... that one looks really weak and meager!

What kind of boat is that in?? :D :D :D

Definately not a tournament ski boat!!!!:D :D :D :D :D

[philwsailz]

Hah, I never knew how well the candle-power boats worked, but I searched them on youtube..

check this out:

pwSplfKL4qQ

[zad0030]

wow phil, you really topped yourself.

[philwsailz]

wow phil, you really topped yourself.

Okay, I have to ask...

how?

[zad0030]

What does that have anything to do with getting a picture for the kids Power Point.

[philwsailz]

I got side-tracked... :D

Actually I did a ton of searcing for a good shot, and am AMAZED at how few there are. gman found the best image in my opinion, and it is just a line-drawing from the glen-l website......

[skyski_tige]

cross the third line today...

[dogbert]

Wow Zad... that one looks really weak and meager!

What kind of boat is that in?? :D :D :D

Kinda like yours, right? :p

I have that same engine :p

[wannabewakeboarder]

BTW we do this project in class, I would NOT be going out on the boat with the project wasen't done;)

Here you go
Thank you.

The #1 reason why he is still in school. :D

Yall no I cain't not tpye if yud pays me 2...:D :ro:

What does that have anything to do with getting a picture for the kids Power Point.

Thank you.

[wannabewakeboarder]

BTW it was a great day to be on the water, Glass all day, Did a little footing. Slalomed for a majority or the time.

It was glass all day

Ok, Ok, Wheres CP3 and that damn banner?

[dogbert]

BTW it was a great day to be on the water, Glass all day, Did a little footing. Slalomed for a majority or the time.

It was glass all day

Ok, Ok, Wheres CP3 and that damn banner?

My 14 year old son learned to barefoot back in June. He loves it and is a natural (skiing on one foot and doing a 360 on his first day). There's a barefoot club here in Austin they're trying to get him to join. I don't know you guys do it, but it is just the nuts! :ro:

[philwsailz]

Alright-

I admit I took a tangent yesterday, and want to take the time to apologize. Thing is, I really did a lot of searching for a good shot; one that not only showed the power plant, but the uniqueness of the installation as well, and that is where things get real tough. That is when I got distracted. Again, sorry.


SO.....

Last night I spent some time diging around further, and I came up with this. Sorry Michael, it is still an installation that is not in a modern ski/wakeboard/tow boat, but it does show the basic setup and allows differentiation hopefully from an I/O installation or a v-drive. In this one, the engine IS easily identified as a modern V8... :) This was the one way I knew of that would allow viewing of the various component, so yes, this is in a wooden boat.


Anyway, I still think that gman's link has the best image for what I perceive you are doing. Maybe this helps too!


Good luck with the project, and hopefully you have what you need!

[wannabewakeboarder]

I don't know you guys do it, but it is just the nuts! :ro:

:confused: :D

[wannabewakeboarder]

Alright-

I admit I took a tangent yesterday, and want to take the time to apologize. Thing is, I really did a lot of searching for a good shot; one that not only showed the power plant, but the uniqueness of the installation as well, and that is where things get real tough. That is when I got distracted. Again, sorry.


SO.....

Last night I spent some time diging around further, and I came up with this. Sorry Michael, it is still an installation that is not in a modern ski/wakeboard/tow boat, but it does show the basic setup and allows differentiation hopefully from an I/O installation or a v-drive. In this one, the engine IS easily identified as a modern V8... :) This was the one way I knew of that would allow viewing of the various component, so yes, this is in a wooden boat.


Anyway, I still think that gman's link has the best image for what I perceive you are doing. Maybe this helps too!


Good luck with the project, and hopefully you have what you need!


No big deal dude. Thanks for the input haha

[gman]

philwsailz,
thanks for the comment. It does provide good details. I just hope he can use it in his presentation and get a good grade.

[zad0030]

You gotta post this thing.... I wanna see it

[jwanck11]

Didn't ya hear??? It was actually supposed to be about v-drives, :D

[wannabewakeboarder]

I did it on the evoloution of ski boats, So there was a little bit about V-drives in it. I needed a picture of a DD engine, Mostly an engine with EFI, Not really an MPI, But it will pass in here because I'm that only one who knows anything about boats in my school. Like I showed them the differance in a DD and a V and How far things have come since the first ski boats in the 50's

[jwanck11]

Was the basis of your report the evolution of the hull?

[wannabewakeboarder]

Evolution of Ski boats.

[jwanck11]

Yup... I saw that. Was wondering if you discussed/focused on changes in hull design?