For Sale: New Acme 537 Prop Puller & Wrench

[Carter13]

Price $400.00
Brand new never used Acme four blade 13.5 X 16V L 1 1/8", Brand new never used Ironman Prop puller and wrench.
Shipping Cost Via US Mail $20.00
Will post pics tonight or tomorrow.

[evil0ne]

Price $400.00
Brand new never used Acme four blade 13.5 X 16V L 1 1/8", Brand new never used Ironman Prop puller and wrench.
Shipping Cost Via US Mail $20.00
Will post pics tonight or tomorrow.

What boat is the 537 good for? I need to pick up a spare for my 24V.

[Carter13]

Evil,
I bought it for my 06 22V as a spare and never needed to use it. It is exactly the same one that came from the factory that was on my boat.
If you check out spare prop by 1labtrainer you will see that Chpthril said Tige is outfitting all there boats with these props.
You could look at your prop because Acme stamps their props with the dimensions.
I am not computer savy with taking pics and posting so my wife will post the pics either tonight when she comes home or tomorrow morning.

[kana12]

im interested but arent they like 375 new or am i wrong? i have a 2006 tige 22v and mine is bent on there right now. its only a three blade and im upgrading my ballast to about 1600lbs or so so a 4 blade sure would help her jump out of the hole.

[Guest]

im interested but arent they like 375 new or am i wrong? i have a 2006 tige 22v and mine is bent on there right now. its only a three blade and im upgrading my ballast to about 1600lbs or so so a 4 blade sure would help her jump out of the hole.
All Current Tige's use the same Acme 537 prop which is the one Carter13 is selling.

A 4 blade prop will give you a better holeshot with a slightly lower top end. Ski/Wakeboard boats aren't built for speed anyway so the Acme 537 is a good choice.

[Carter13]

Kana,

I saw the prop on Wakeside for $412. I am selling the prop, Ironman prop puller and the wrench for $400.00. The Ironman and wrench lists for $100+.
These are all brand new and never used.

[kana12]

how easy would it be for me to change it by my self?

[chpthril]

how easy would it be for me to change it by my self?

'bout 5 mins on the trailer.

[Carter13]

9402

I will sell separately.
Prop price: $350 Puller and wrench: $50.00

[thtrog]

Chptril is correct...easy to change. Good buy for new prop and puller!

[kana12]

i have a 13x11.5x1 1/8 3 blade on my 06 22v... is thi sthe right 4 blade i need?

[Guest]

i have a 13x11.5x1 1/8 3 blade on my 06 22v... is thi sthe right 4 blade i need?
In various 22V tests I have looked at, here are the 4 blade sizes. They vary by year and power plant.

Test Prop: Acme 14 x 17, 4-blade

Test Prop: Acme 13 x 12 4-blade
Test Engine: GM Vortec 5.7L, 315 hp

2005 Tige 22v
Test Prop Acme 13.5 x 16 4-blade
Test Engine GM Marine Power 5.7L, 340 HP

I would call ACME and see if the ACME 537 fits your boat. The current models seem to use the 4 blade 537 13 1/2 x 16 1 1/8 shaft LH but I can't tell what an 06 22V uses in a 4 blade. Sorry:(

[Carter13]

I had the 5.7 340 HP.

[Carter13]

Kana,

I am surprised you have a three blade prop on your 22V.

[sparky216]

do you deliver?

[airnudie]

do you deliver?

Kind of funny I was thinking the same thing......

[Carter13]

SOLD.

[wmc821]

Do you still have prop?

[Carter13]

Read the post right before yours wmc821. :D