Wake Board Pro Users?

[crun]

just wondering if anyone has had the same problem as me. everything works fine as far as setting speed and controls but every time i start the engine it revs to about 3000 and wont come down. i have to lift the motor hatch and turn the throttle down using the knob. (black knob connected to throttle. then its fine. i tried opening the motor cover to see what was happening and possibly fix it myself. the engine starts and about 3 seconds later the black knob starts turning and goes as far as it can and bounces back a half turn and continues to try and increace the RPM's then bounces back again and repeats this about four times and stays at 3000 RPM's.

any savvy know-it-alls out there? please help! thanks

ps- i have digatal pro 6.5.

[edouglas]

Did you get this fixed? Mine did the samething...

[hanzj]

Mine was fine for 2 years, then constantly did the same exact thing you describe...then about a few weeks later the servo motor went out. $200+ for a new one and it works fine again. They said the servo motor had gotten wet and it isn't supposed to. Well the thing is in the motor box and I think that is bound to happen.

[joe8395]

You could try calling Perfact Pass...they seemed very helpful when I called with a couple questions I had.


www.perfectpass.com