View Full Version : cleaning the inside of the boat
Domsz06
01-22-2004, 09:30 PM
What's everyone use to clean the vinyal in their boat? i've heard son-of-a-gun makes the viyal dry out, is that true?
jeffro
01-22-2004, 09:57 PM
any time you clean it, (especially with something harsh), you should let it dry then follow up with some 303 protectant.
i use fantastic mostly for cleaning. there is a great document in the downloads section of this site that gives you all the details about cleaning the vinyl.
click here: http://www.tigeowners.com/interior.shtml
tige24v
01-23-2004, 12:44 AM
I agree that 303 is the most important piece of protecting any boat interior. I always start with a mild bleach free cleaner like simple green or a 3m vinyal cleaner and then work up to something like soft scrub or any fantastic with bleach as needed.
RZMike
01-23-2004, 01:07 AM
I used to use Simple Green on my previous boat - never had a problem with it. I switched to regular Fantastic when I bought my Tige because that's what the owner's manual said to use. The documentation that came with my Tige specifically said not to use Simple Green :confused:
Domsz06
01-23-2004, 09:02 AM
thanks for the info, I'll use that now!!
Andrew
01-24-2004, 03:23 AM
The best way to clean the vinyl in to use a bucket of warm saopy water. Use a mild dish soap and a soft scrubbing brush. The vinyl is textured and the brush will get you a deep clean and not just the top. Then use the 303. FYI
Domsz06
01-24-2004, 09:01 AM
thanks so much, will do that when I can get a couple of days in a row above feezing so I can clean it and let it dry
OldSkier
01-26-2004, 11:59 AM
Although I have been unable to find in Canada, some of my buddies in the US use "G&T Vinyl Cleaner" for cleaning, followed by the 303 protector. The G&T stuff can be ordered directly from G&T.
Unrelated, but they also use "Bo-Shield T9" as a lubricant for coating mechanical parts under the motor box. (Made by Boeing aerospace) http://www.boeshield.com/
hanzj
01-27-2004, 08:16 PM
Anyone know of a place to get 303 cheap? That stuffs kinda pricey, and I go through that stuff faster than binding lube.
I was suprised to find 303 cheaper in the local Chevy dealer's parts Dept than the boat dealer $2.00 Diff. It's worth a try.
vBulletin® v3.8.1, Copyright ©2000-2012, Jelsoft Enterprises Ltd.