Depth finder

[tigejohn21]

Which gauge is the depth finder located on an 2003 21i? The tach or the speedo?

TIA,

John

[Domsz06]

speedo.

Dom

[tigejohn21]

I installed a Perfect Pass Wakeboard Speedo. Do all Tige owners that get the PP installed lose the depth finder?

[lee]

You could have mounted the PP in the panel to the right of the steering wheel and left the speedometer in place. You can now install a stand a lone depth gauge and mount it the panel.

[David]

Our boat has Perfect Pass installed on the side panel and the speedo is still mounted in the same place as it came...Only disadvantage: After P.P is installed and mounted in the side panel next to the steering wheel, there is no room for a head unit...

[tigejohn21]

Lee: is adding a depth gauge something I should do with the dealer? Man, I'm gonna miss that thing this summer :( Or, can I buy a gauge from somewhere and tie it into existing hardware?

TIA,

John

[lee]

It is not too hard, just mount the transducer with epoxy to the bottom of the boat and connect a ground wire and a power wire to one of the swiches you have on the dash panel. If you have a blank gauge on the dash you can remove that and put in the face for the depth finder or cut a hole in the panel next to the sterring wheel.

[tigejohn21]

Lee,

Shouldn't I already have the stock transducer somewhere on the bottom of the boat?

TIA,

John

[lee]

Yes, it is mounted on the rear with the paddle wheel for the speedo. If you buy a depth finder it will come with its own tranducer, they are easy to mount.