Stereo Upgrade

[goose69]

Just finished upgrading the stock clarion system. Rewired all speakers and replaced with kicker km 620's. Rewired with 00 wire direct from the battery and fused it. They powered current amps from distribution blocks and add a 1200w Audio Drift amp. If you can get your hands on one they are a true 1200 rms. It is made by Audio pipe at half the price, but they made 2000 of them and thats it. Wired my current MB quart tower speakers to the rear channel @ 4ohm and when Double Polk Bunts come in thursday i have them wired (not connected) to the front channel @ 2ohms. Ready to rock the river!!

[ajholt7]

Looks sweet! Where did you get all of your wire and dist. blocks?

[ImaPigDog]

Great Job!!! :ro:

[goose69]

Looks sweet! Where did you get all of your wire and dist. blocks?

A place called Lawson Car stereo in Augusta GA. Fuse block $15, Audio Pipe gold Distribution Blocks $18/ea. Wire $136.

[chpthril]

Looks sweet! Where did you get all of your wire and dist. blocks?

Adam,

Just and FYI, I have 1/0 ga wire for $1.25 p/ft, so 40ft should cover a 20V install and run you about $50 + a little shipping. My non-fused distrobution blocks are $12.00. For circuit protection, I like to recommend a marine rated manual-reset circuit breaker. They run about $38 - $45 depending on current rating.

[ajholt7]

Adam,

Just and FYI, I have 1/0 ga wire for $1.25 p/ft, so 40ft should cover a 20V install and run you about $50 + a little shipping. My non-fused distrobution blocks are $12.00. For circuit protection, I like to recommend a marine rated manual-reset circuit breaker. They run about $38 - $45 depending on current rating.

As soon as it warms up I I can do some measuring I'll get back to you.

[petrey10]

sweet setup man...


and anybody else out there looking to upgrade let CHPThrill hook you up... he knows his stuff