Tower cover

[jsz]

My used boat came with a nice custom fit cover but every time I want to cover the tower and hide the speakers I need to thow an enormous tarp over the whole thing. Have any of you seen custom covers for towers? Any pics or info on where and how much would be great. I'm in Southern CA.

[whitlock87]

I made my own.
It cost me around $25. in parts, but here is a link to a company that can do it for you.
WWW.SCREAMINSACS.COM

[flackpack]

Adlee boat covers in Corona is an excellent shop. They most likely made your bimini for Tige' Watersports. The people there are friendly, and can make any type of custom covers for your tower or other boat parts. I've had them make a bow cover for the open bow to keep us warm in the winter. I am also having them make an extended bimini to attach to my current bimini for more summer shade.

http://adleecoversboats.com/

[jsz]

Thanks for the info guys. I have two speakers on the tower that have separate covers. I want to get a cover that will keep the entire tower (speakers, board racks, basically all tubing) out of the weather since it's stored outside. I bought the boat from a guy in AZ and it came with a cover. I'll prbably end up with Adlee. Thanks again. Any other info or pics of whole tower covers out there?

[jsz]

By the way, that's a nice looking cover for your speakers. I want something like that that goes all the way down to the fiberglass. How did you make it? Material? Does it velcro?

[whitlock87]

I got everything at a place called Joann.
I used a sipper down the middle and elastic at the ends.
The material is what they call Table top vinyl. it is completely water proof with a cotton back, and runs for $7.00 to $12.00 a yard. ( it’s not as thick as marine vinyl )

[jsz]

Thanks for the reply. Are you talking about the store called Joanns fabric? Looks like a pretty good fit. You or your wife is good with the sewing machine. Is that a tige sticker or did you have it stitched? I can't tell from the pic.

[whitlock87]

My wife did the sewing, It took about 4 hours from start to finish.

Yes it is Joann’s fabric.

It is a sticker that I got form Tige Water Sports. It not holding up, so I will need to airbrush it on.