Are you sure it’s 3.8 in? I remember it being smaller, universal Roswell mounts worked.

A Classic! Looks to be in pretty good shape from the pictures

I was looking at a tube style but can’t seem to find one with the same diameter as the tower 97.5mm/3.8 inc If anyone knows where I purchased a few...

You have two options here fab up a custom mounting bracket or just get a standardized rock for a tube style tower. I don’t believe they make one for...

First one seems way too cheap.

Bamer I have about 450watts to my Rev10's currently. The Syn 2 was removed a few years back and replaced with a ppi 900.4. That sound is behind the...

How are your rev10s powered? I’ve found that my Rev10s with 300w each speaker is so loud that I actually turn down my 4 in boats. Sent from my...

If powering off the OEM amp, your available chnl options are 1 and 2 in parallel with the bow pair, or head unit. This may play into your locations,...

my '12 22ve had bow in factory, 2 speakers in the rear of the cabin above cupholders, 1 under passenger area above cupholders and I mounted the 4th...

I set up my 07’ 22VE as depicted in OEM setup except that the under helm location is my 12” sub box only. That 4th XS-650 speaker is mounted on the...

At one time we used Makita cordless drills. I'm kind of surprised Mike didn't find one lol! Under ballast is a huge no no. Now they use cover plates...

It's pretty common to find washers, zip ties, and maybe a socket or pliers. I've never had an instance of a screw puncturing a ballast bag so I...

Bilge Booty! I found lots of stuff when I was rigging boats. It’s not worth the manufactures time to have their employees digging around the bilge...

I guess we should be grateful for the accidental bonus ballast. Just wish they had left it in more surfable placement:) I am just more concerned...

Hand made vs machine made I bet. Sent from my iPhone using Tapatalk

chp probably has a lot more insight into this with his audio background but I bet I've installed stereos in over 2 dozen cars ripping out...

Ill 3rd it. Seen lots of manufacturers with left over hardware in a boat. To date, I think the best of my finds, was a Makita angle head flash...

I will second this. Some do better than others but I think you will always find a stray washer, zip tie end, nut, screw etc. ...

I have owned Tige, Mastercraft, Malibu and Nautique. They all typically come with some 'bilge trash' as I like to call it.

my '06 supra was littered with pieces/parts in nooks and crannies when I cut it up to install a stereo. the '12 22ve we had was pretty clean...

I'm always amazed at what I find when I start digging around. Saying their process is a bit sloppy is an understatement sometimes.

who invented the internet

Some of the Macbook provide the best working speed which I have also checked on the https://au-assignmenthelp.com/how-to-write-an-introduction.html...